Love the LE, I was lucky to pick up a set of side decals for the back-box of the LE when they had them for sale

F8691B1B-A5D1-4C9E-BA25-41BAD2D79662 (resized).jpeg

What about the ramps, you said those were improved?

You can clearly see the subpar cabinet pre 2019 from the posted photos. However, in order to show all the other subtle differences, there would need to be quite a bit of work to go through machines and mark out with pre 2019 and post 2019 differences. Was not able to even get good enough photos without a tear down, to clearly show newer engineered Joker targets for example. Too much has to be stripped away to see what Stern has done. I could clearly see everything when I completely stripped my tables to install PF protectors. Should have photo documented it at the time, but did not think of it. I’m not motivated to do all that work, as there is no benefit for a game that has been archived. I only presented what I’ve learned, since some were saying Batman plays clunky, which is not true of post 2019 models, that Stern fixed after lots of complaints and many years of building Batman.

Nice Costco mats

Love them, definitely need them while playing pinball

This is not true, Doc. I did the art for the gadgets myself. I had VERY little time to execute 120 gadget drawings, and had to invent some as they were only mentioned on the show, but not shown. Due to the limited time, they may not have been illustrated to a polish you feel is my standard, but I did the best I could in the time I had.

I am definitely in 100% if you do make a Translite or poster of the Batman gadgets

I’d be in for translite and artblades too, if possible. You did such a great job on the whole art package.

Man your lucky. You can get them in the EU but shipping is insanely high. I had a friend look into it for me. Shipping and feed to him was way more than one decal, let alone shipping to me on top of it. So no batgirl for me.

Here is the underside...

Looks like the targets are the same to me.

20230209_153848[1] (resized).jpg

20230209_153856[1] (resized).jpg

20230209_154317[1] (resized).jpg

I was having an issue where on a full orbit the ball would hit the left slingshot instead of the left flipper. I tried to think of what I could do because the ball guide had no extra room to move. I added a small piece of thick tape that was maybe a tenth of a mm thick. The ball was now hitting the right flipper instead so that was no good either. I then added a regular piece of scotch tape with a small piece of paper folded in half. It now works as I wanted to hitting the left flipper.

It’s amazing that such a small adjustment could make such a huge impact.
837DAE08-F43A-4DB3-88BF-6E2FE3DC3D72 (resized).jpeg

They’re definitely not the same. Pulling the top would prove that, but I’m not going to pull the top on the old and the new to prove it. I don’t care that much about it, lol.

Any idea where I can get a new Penguin hole protector? Mine is shot. Sent a note to Cliffy but haven’t heard back yet

Anyone have a Catwoman backbox decal for sale?

800795E3-DB36-4CEA-B474-04A95AA3626F (resized).jpeg

Yeah what he said.

Would look great on an LE to have Batgirl on one side and Catwoman on the other.

What did I get wrong? I know you did the all gadget art on the 120 gadget plaques and they look fantastic. But I wish Stern gave you time to also put your art on the 120 episode plaques instead of the generic comic art they used for those.

Sometime artists seem to be their own worst credits. All the gadgets I've seen look amazing. You did an awesome job!

Too bad the gadget art also didn't get used in the final code. Would have great to show a random gadget on the LCD everytime you used one via the gadget button.

I'm not verified so I share my gadget and card here:

#15 Bat phone
and
Robin to the rescue

PXL_20230212_131009711 (resized).jpg

PXL_20230212_131021479 (resized).jpg

Is there a list of all 120 gadgets? I would love to see all of them

Perhaps someone would be kind enough to complete a high resolution scan of the catwoman backbox side art, so we may repriduce it ourselves... for that those of us who prefer looking at Julie Newmar rather than Burt Ward in his underware.

I'd take Julie Newmar for the win any day of the week!

Just out of curiosity. Does any one know what this Bat-Gauge was used for? Or on what episode it was showed?

E8giQDKXIAkhDd7 (resized).jpg

In Season 1 episode 2 “Smack in the Middle” Batman uses the Bat Gauge as a detector to locate where or what wall to blow up to rescue Robin! I guess it was a detector to locate Robin! Batman uses the Bat-Gauge then places a bomb in that spot, he then uses his awesome laser gun to lit the bomb!

It’s about 13 minutes into the episode

Awesome man! Thanks! I will check it out!

For those that have the clone topper..... I currently have mine set to turn on with an insert light with a sensor. This means that in attract mode the topper light is on and spinning the entire time. Is there a way to have this powered from a source that would only come on when you start a game?

You don't want the topper on in attract mode??

The light just keeps spinning and is noisy.

so happy I was able to get on the waitlist and finally got an email to lock in on a Batmobile! can't wait to get it on June

I’ve tried searching this thread…but with 5k posts makes it difficult…does anyone have a pic of the turntable from underneath so I can verify how the wiring is supposed to be routed? My motor screws were loose and upon investigation the wiring protection mesh is frayed behind belief and was really tight. Any help with underneath pics would be awesome.

Holy crap…that’s way different than mine. 435D772F-FEFD-4BF5-864D-301DD519A5D1 (resized).jpeg

There are more pics on page 9 of the image gallery.

They finally added the different models of Batman 66 to Pinside, only took a couple of years lol

F19CCE70-0348-4416-8EDF-1FC341789DAE (resized).jpeg

Anyone know if you can buy a “bat gadget selector “ decal . Mine did not make it trying to move to a new lockbar

Picked up a replica of the SLE Topper for my Batman 66. I am extremely happy with it.

IMG_B03462FD758D-1 (resized).jpeg

Are there any more avail? That looks awesome!

I got it from radiomoz. I think that was the only one he had. It really is sweet.

There’s one in the works, it’s been a long road but it’s worth it! Soon

Soon

Got mine from biglaw. Not sure if he's making any more.

Thanks Tony Glad you are enjoying those!

Just can't get enough of this game. Lyman, wherever you are, i'm eternally grateful for this absolute masterpiece.

Also very much wondering what the next Kapow release might be. EHOH and Batman 66 are my two all-time faves.

Can someone point me to video or explain how to adjust my crane that is misaligned. I moved the adjustment tabs as much as they allow but still way out of alignment.

Thanks

If you haven't done so already go to the service menu and set the Penguin Lag Adjustment setting to zero and power cycle the machine.

We really are! Showed my wife before I bought them and my wife said “Get them!”

I’m also interested to know where to get the smaller figures. The ones from McFarlane are a bit too big. Here is my Catwoman mod.

FBB4BBD9-30FC-4065-A10A-9D5C73221453 (resized).jpeg

The Hallmark figures i find are the best size. The Julie Newmar Catwoman one was a must for me.

Apron Decals available on Pinside.

IMG_6431 (resized).JPGIMG_6435 (resized).JPGIMG_6438 (resized).JPG

Like those! Where....cannot find?
Never mind...found....ordered

After 6 1/2 years in play the lockbar decals from my SLE are almost gone.

Cause of the reason the game is out of production you can‘t order that decals anymore.
So I started to do my 1 : 1 run of them.

Graphics are set and the color matching foil is ordered.

Looking forward to a perfect SLE game again next week.
17B64AEA-36CB-4BAB-A743-51779609E4D4 (resized).jpeg281511FB-AE81-4D8A-B6AA-5D57AD5B463B (resized).jpeg357388AA-97A5-493A-BD55-B884BD034CFA (resized).jpeg4CD2150C-4330-4229-AC38-84B1AF733E3A (resized).jpeg6480766C-35F7-4CE9-8EE8-5E6264BE888F (resized).jpegDCC52D00-9E01-4699-83B6-0C1B56606F6A (resized).jpeg