You're currently viewing posts by Pinsider piperpinball.
Click here to go back to viewing the entire thread.
Quoted from mthirkell:Since we are hearing primarily negative comments, which we all need to hear, I thought I'd mention that my LE is flawless (playfield, t-rex, posts etc). This game is a keeper.
Same here, no issues.
I have LE#99 about 350 plays and no issues. Great Pin.
Highly recommend hooking up an external sub.
-Dan
Quoted from Gotfrogs:Where did you get the green rubbers for the flippers? What size and material did you get. My stock ones are already looking rough![quoted image]
Remove all the black, stock bands and replace with Titan or Super Bands from Pinball Life>orange look great on JP.
The Stern stock black bands leave all black shit everywhere. And over time ball trails.
First thing I do is remove all the stock black bands and throw them away.
JPLE #99 owner here.
All the posts in my pin where loose.
Highly recommend before you start playing your new pin. Is to lift up the pf and tighten all the posts and all other screws/nuts.
Not sure how this passed QC at Stern? But lots of adjustments need to be made on NIB pins lately. Some loose connectors too> probably came loose during shipping.
Super fun pin.
And anyone having issues with the Raptor gate not going all the way down on the right side? Its not level, and has a little lip to it. Sometimes the ball gets stuck behind the lip behind the raptor gate. We adjusted it but still not 100%. Thoughts?
-Dan
Quoted from Wickerman2:Is that what's doing it? Good to know.
yes. I didn't know this either up and until a few years ago.
Not sure why Stern still uses these crap black bands, but over time they breakdown and leave a mess on your pf.
Quoted from hawkmoon77:What method did you use to paint the wireforms?
We powder coated the wire forms and ramp, apron, coin door and speaker panel.
Tried to make it look more natural like wood and vines.
Quoted from hawkmoon77:It came out great. I didn't know you could powder coat over chrome. Gives me some ideas.
Yes, anything metal can be powder coated, even if already chromed. they will just sandblast it all off before they powder coat it.
-Dan
Quoted from That370Z:Exciting day, our premium came in! The less exciting part, first thing I noticed after unboxing..it’s already falling apart. The hunt for the missing screw is on (if it was even there originally). SMH, get it together Stern!![quoted image][quoted image]
Same here on mine. Every screw and nut were loose on my pf. And every post super loose!
Recommend everyone check and retighten before playing.
And raptor gate was Misaligned
Great game after adjusting.
Quoted from gliebig:Anyone get a cool gift in the box like a signed sword in some of the Deadpools?
Anyone having an issue with the new Code with the T-rex not coming down after T-rex is spelled? The previous code it wasn't an issue. Now when we spell T-rex the Trex doesnt come down to shoot at it.
Is this a bug or a new software setting?
Quoted from PiperPinball:Anyone having an issue with the new Code with the T-rex not coming down after T-rex is spelled? The previous code it wasn't an issue. Now when we spell T-rex the Trex doesnt come down to shoot at it.
Is this a bug or a new software setting?
Guess I'm the only one with this problem? lol
However, its now fixed!
The issue: The set screw to the shaft inside the T-Rex motor was loose. In fact, everything on and around the T-Rex motor was loose but mainly the loose set screw on the shaft. WE tightened everything and now the T-Rex is working!
Stern really needs to get their QC department in check.
You're currently viewing posts by Pinsider piperpinball.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/welcome-to-the-jurassic-park-le-club?tu=piperpinball and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.