Found 3717 posts

Posts mentioning ‘rollergames’ ordered by in descending order.

• RSQ
  24 4 hr

  Best Diner cabinet decals Post #24 in topic

  Posted today by mrm_4 – in Restoration questions ‐ Last reply today

  For what it’s worth I just did a rollergames cab with classic arcades decals and there’s nothing wrong with them. [att=8225832,3943588 caption=""]

• TGE
  2 30 hr

  No music, some sounds - Williams System 11C / D-11581 Audio Board Post #1 in topic

  Posted yesterday by Murrphy – in Tech: Generic ‐ Last reply yesterday

  I have a Rollergames that has worked faithfully for me for 25 years - not a single problem. All of a sudden ...

• ALL
  3K+ 4 dy

  Official "HARDTOPS" thread Post #3356 in topic

  Posted 4 days ago by mrm_4 – in All Pinball ‐ Last reply yesterday

  Messaged HardTops they will not make a Rollergames. Not even without the logos. I talk with Bruce and Scott regularly and Keith the OP of this thread. I offered to give my rollergames playfield to use to create the hardtop last year and they said they couldn’t.

• ALL
  3K+ 4 dy

  Official "HARDTOPS" thread Post #3355 in topic

  Posted 4 days ago by Stebel – in All Pinball ‐ Last reply yesterday

  Even better Messaged HardTops they will not make a Rollergames. Not even without the logos.

• ALL
  688 6 dy

  Endless Weekly Top 100 Micro-Analysis and Schadenfreude Thread Post #667 in topic

  Posted 7 days ago by TreyBo69 – in All Pinball ‐ Last reply 6 days ago

  Elton John slides another spot down to No 9 while Jaws creeps up two spots to No 15. Labyrinth bounces back up by 3 more spots to No 24. Propelled by people who think rare = fun, Transporter the Rescue moved up 6 spots to be tied with DE Star Wars No 161. The biggest loser of the week is Americas Most Haunted sliding 6 spots to being tied with the vastly underrated Rollergames at No 187. [att=8217323,3936068 caption=""]

• STN
  2K+ 7 dy

  Wow - Stern and Distributors in FULL PANIC mode with John Wick. Post #2213 in topic

  Posted 7 days ago by fuzz – in Stern Pinball ‐ Last reply today

  ... height at this point. this exactly I paid 1300 for my demo man 500 for my rollergames 2200 for my ripleys so on so on.....

• ALL
  1K+ 8 dy

  Show off your rare/prototype pinball stuff.... Post #1516 in topic

  Posted 9 days ago by Guidotorpedo – in All Pinball ‐ Last reply 8 days ago

  My friend Jay is selling my old machine, an early sample rollergames. This game has the red colored Williams display panel, DP playfield with insert and art ...

• ALL
  6K+ 13 dy

  3D printing sharing thread.... Lets better the hobby Post #6696 in topic

  Posted 13 days ago by Gunner007 – in All Pinball ‐ Last reply today

  ... electronics. Then graphic design, very basic. Then did some cad design. Made and freely shared a rollergames shooter tunnel, IM spitfire and gel color tree mod. My military pension sucks but I broke ...

• CLB
  1K+ 15 dy

  Rock, Rock, Rockin' Rollergames! (club) Post #1396 in topic

  Posted 16 days ago by JeffZee – in All clubs (...members only!) ‐ Last reply 8 days ago

  Don't know if this is of any value, but I have some diverter info on my webpage (about halfway down)... http://www.jeff-z.com/pinball/rollergames/repair/repair.html I used a grinder to fine tune the length of the plunger. A little bit of plunger difference makes a big diverter difference.

• RSD
  2 16 dy

  "ROLLERGAMES PINBALL APRONS" (WILLIAMS) files scanned and restored Post #2 in topic

  Posted 16 days ago by Mikonos – in Restorations documented ‐ Last reply 16 days ago

  IMPORTANT: Use my links for a full quality photos and screenshots!!! "Rollergames Pinball Shooter Apron" (WILLIAMS) artwork files scanned and restored in Zona Arcade by Mikonos. https://www.zonaarcade.com/fotos/capturas/Rollergames-Pinball-Shooter-Apron-Restored-Mikonos1.jpg [att=8204906,3924760 caption=""]

• ALL
  3K+ 18 dy

  Official "HARDTOPS" thread Post #3350 in topic

  Posted 19 days ago by Stebel – in All Pinball ‐ Last reply yesterday

  Already tried Rollergames. The sponsor companies all over the playfield make it a licensing nightmare. Should just make them with blank white spaces. People could add their own brand decals to the overlay. So many Rollergames have worn playfields.

• ALL
  3K+ 19 dy

  Official "HARDTOPS" thread Post #3346 in topic

  Posted 19 days ago by mrm_4 – in All Pinball ‐ Last reply yesterday

  Pretty sure Rollergames would sell decently. Considering there is a backglass and plastic pset available. Already tried Rollergames. The sponsor companies all over the playfield make it a licensing nightmare.

• ALL
  3K+ 19 dy

  Official "HARDTOPS" thread Post #3345 in topic

  Posted 19 days ago by Stebel – in All Pinball ‐ Last reply yesterday

  Pretty sure Rollergames would sell decently. Considering there is a backglass and plastic pset available.

• PMW
  5 20 dy

  Wanted: Rollergames in Ex shape Post #4 in topic

  Posted 20 days ago by mrm_4 – in Pinball machines wanted ‐ Last reply 20 days ago

  How has no one sold this dude a Rollergames yet?!!! Help this guy out!

• CLB
  1K+ 23 dy

  Rock, Rock, Rockin' Rollergames! (club) Post #1372 in topic

  Posted 23 days ago by DumbAss – in All clubs (...members only!) ‐ Last reply 8 days ago

  I (no, not me, but rather you, the reader) have a Rollergames and I want to install the backbox flashers that were removed early in production. How ... installed at the factory. Reference: https://pinside.com/pinball/forum/topic/rock-rock-rockin-rollergames-club/page/15#post-4211952 for proof. The values of the resistors in the ... a post from @johnwartjr. Reference: https://pinside.com/pinball/forum/topic/rock-rock-rockin-rollergames-club/page/6#post-2710864 for this information. You can also see it in the image ...

• RSQ
  10 24 dy

  Source for Rollergames decals? Post #10 in topic

  Posted 25 days ago by cgainsley – in Restoration questions ‐ Last reply 25 days ago

  Hi hi, does anyone have a source for the Rollergames ramp decals or files to print my own? I was hoping to replace my busted ramp and ball lock cover, but not if I can’t do the decals, too. Happy to have joined the Rollergames club. I’m obsessed with how 80s and silly this game is.

• RSD
  262 24 dy

  Don’t Flip… FLIP! - Rollergames Restoration Post #249 in topic

  Posted 25 days ago by mrm_4 – in Restorations documented ‐ Last reply today

  I was not home for a couple days but I can take pics of mine if you need anything clarified. I appreciate that, I posted in the Rollergames Club, but it seems like that club is a dud sometimes. Had tons of activity a few years ago but recently it seems to be pretty slow traffic. Thanks!

• CLB
  1K+ 25 dy

  Rock, Rock, Rockin' Rollergames! (club) Post #1368 in topic

  Posted 25 days ago by mrm_4 – in All clubs (...members only!) ‐ Last reply 8 days ago

  I'm planning on doing this project soon. Parts just arrived! Please report back on your progress I’m in the middle of a restoration so I won’t be able to test it for quite a while but that is the route I’m taking. Orange wire in pin 5 on J7 and then I’m following post 729 for the J11 connector: https://pinside.com/pinball/forum/topic/rock-rock-rockin-rollergames-club/page/15#post-4211952

• RSD
  2 31 dy

  "ROLLERGAMES PINBALL APRONS" (WILLIAMS) files scanned and restored Post #1 in topic

  Posted 32 days ago by Mikonos – in Restorations documented ‐ Last reply 16 days ago

  "ROLLERGAMES PINBALL APRONS" (WILLIAMS) artwork files scanned and restored in Zona Arcade by Mikonos IMPORTANT: Use my links for a full quality photos and screenshots!!! "Rollergames Pinball Left Apron" (WILLIAMS) artwork files scanned and restored in Zona Arcade by Mikonos. https://www.zonaarcade.com/fotos/capturas/Rollergames-Pinball-Left-Apron-Restored-Mikonos1.jpg [att=8181130,3905022 caption=""]

• RSD
  262 32 dy

  Don’t Flip… FLIP! - Rollergames Restoration Post #223 in topic

  Posted 33 days ago by Garrett – in Restorations documented ‐ Last reply today

  ... show. Imagine it's some time next year and you have played a couple hundred games on Rollergames. You then look down at the cabinet. Would you say "I'm glad I..." or "I should have ...

• ALL
  7 33 dy

  White Water / WH2O - Scratch Build #2 Post #3 in topic

  Posted 33 days ago by MiniPinHead – in All Pinball ‐ Last reply 6 days ago

  ... make the # 01-10892 again, but until then there seem to be a good supply of #rollergames coils :kidding: Source of a # B-13488: https://www.marcospecialties.com/pinball-parts/B-13488

• RSD
  15K+ 37 dy

  HEP This Week Post #14935 in topic

  Posted 37 days ago by mrm_4 – in Restorations documented ‐ Last reply 2 days ago

  Looks like another rock n roll weekend. [quoted image][quoted image][quoted image][quoted image] I used that same amp and power supply set up with my firepower and xenon restos when I added a subwoofer to them. Just got the same set up for the sub and upgraded speakers for rollergames. Such a sweet rig for mods and an amp with that power supply. Can’t wait to see what you do with this Kiss man!

• ALL
  5 39 dy

  XPIN going to the NW Pinball Show! Need some help... Post #1 in topic

  Posted 40 days ago by XPinPinball – in All Pinball ‐ Last reply 38 days ago

  ... (6 or 7 digit scoring, doesn't matter which) *Any Williams System 11B or 11C game (i.e. Cyclone, Whirlwind, Rollergames, etc.) *Any Bally/Midway title (think Atlantis, Motordome, etc.) Send me a PM post if you ...

• RSQ
  273 40 dy

  Getting my feet wet with 3D printing... Post #274 in topic

  Posted 41 days ago by Gunner007 – in Restoration questions ‐ Last reply 41 days ago

  ... , look into PLA + (sometimes called 'plus'). https://www.tinkercad.com/things/dF6L98HBsca-rollergames-tunnel-gunner007 I did this for my Rollergames. Never printed it though before I sold RG. I'd like to see what it ...

• CLB
  16K+ 41 dy

  Up the Irons - Stern Iron Maiden Owners and True Fans Club! Post #15921 in topic

  Posted 42 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply today

  I sent an email to him over a week ago and haven't got a response- is that typical? (Never tried to order from him) Also, will he sell the carbon fiber w/o the whole kit? Paulo in Portugal. Makes most stuff cliffy does. Cheaper and fast. If he has it. Made some for my whirlwind and rollergames.

• !!
  907 45 dy

  Ramp-O-Matic Ramp Thread Post #899 in topic

  Posted 45 days ago by mrm_4 – in New parts announcements ‐ Last reply 23 days ago

  Sunday funday! [quoted image] I have both of these ramps from you. This pic makes me happy! Did my Rollergames ramp I sent you help at all?

• OFS
  11 45 dy

  Find YOUR White Whale! Post #11 in topic

  Posted 45 days ago by jrcmlc – in Other Stuff For Sale ‐ Last reply 45 days ago

  I need a cq early make diamond plate rollergames and a cq stock south park. I'd also really like an afmr LE for under $12k huo with low plays. I guess while I'm asking for stuff if like a Pulp for under 7500 also

• !!
  12 47 dy

  Williams 11a nv-ram and wifi connectivity project Post #11 in topic

  Posted 48 days ago by slochar – in New parts announcements ‐ Last reply 48 days ago

  ... the door switch). The switch health table is in the $600 range (variable by game... rollergames is $5ee-062d). If you go into pinmame and do a factory reset the health table ... infomation there is stored as segment data - for instance, 7 digit segment data for player 1 in rollergames is stored at $230-$237, the extended segment data $250-$257. I don't think capturing the ...

• !!
  12 48 dy

  Williams 11a nv-ram and wifi connectivity project Post #2 in topic

  Posted 49 days ago by Shogun00 – in New parts announcements ‐ Last reply 48 days ago

  What a great idea. If you could get this to work on all versions of System 11, then I would be interested in buying one for my Rollergames.

• !!
  907 49 dy

  Ramp-O-Matic Ramp Thread Post #896 in topic

  Posted 49 days ago by Jjlp – in New parts announcements ‐ Last reply 23 days ago

  Sunday funday! [quoted image] Rock rock rock and rollergames

• EV
  3K+ 50 dy

  Pinfest 2024 - buy, sell, trade, want (no hotel talk) Post #1761 in topic

  Posted 51 days ago by daly124 – in Events ‐ Last reply today

  I know this may be a tad bit of a long shot...asking for a family member....anyone selling anything with multiball in the 2k - 2.5k range? (Working, not a project game) I will have a Rollergames and Party Animal, both are multitask and below 3k.

• EV
  3K+ 51 dy

  Pinfest 2024 - buy, sell, trade, want (no hotel talk) Post #1732 in topic

  Posted 51 days ago by 121g1gw – in Events ‐ Last reply today

  ... , Frankenstein, Frankenstein, No fear, Highspeed, Flash, BK, BK2000, Dialed In, Spiderman, Star Trek (Prem), 24, Rollergames, Firepower, F-14, Superman, BS Dracula, Big Lebowski. Not an exhaustive list open to different pins ...

• EV
  3K+ 53 dy

  Pinfest 2024 - buy, sell, trade, want (no hotel talk) Post #1556 in topic

  Posted 53 days ago by 121g1gw – in Events ‐ Last reply today

  ... , Frankenstein, Frankenstein, No fear, Highspeed, Flash, BK, BK2000, Dialed In, Spiderman, Star Trek (Prem), 24, Rollergames, Firepower, F-14, Superman, BS Dracula, Big Lebowski. Not an exhaustive list open to different pins ...

• TGE
  22 55 dy

  Pinsound Problems! Any Experts??? Post #18 in topic

  Posted 55 days ago by cgainsley – in Tech: Generic ‐ Last reply 53 days ago

  ... two week delay. He stated that it was likely because I had a rottendog board in my Rollergames and the Pinsound Plus wasn't communicating properly with that board. ****I've redacted the solution to ...

• TAN
  3 55 dy

  JOKERZ! Williams system 11b display 1 missing a segment on all characters. Post #2 in topic

  Posted 55 days ago by Shogun00 – in Tech: Alpha-numeric ‐ Last reply 55 days ago

  I ran into a similar issue on Rollergames. It turned out that the ribbon cable was loose.

• EV
  3K+ 58 dy

  Pinfest 2024 - buy, sell, trade, want (no hotel talk) Post #1246 in topic

  Posted 58 days ago by daly124 – in Events ‐ Last reply today

  I have a Williams 11C MPU from a Rollergames. Was working and had some repairs done, but still needs some more work. Also has some battery corrosion. Make an offer. [att=8136639,3866377 caption=""][att=8136639,3866378 caption=""]

• RSD
  62 64 dy

  Ready, Set, RESTORE: A Pit Stop project Post #24 in topic

  Posted 65 days ago by A_Bord – in Restorations documented ‐ Last reply 17 days ago

  You are an airbrush/stencil master sir Thanks! A very nice compliment, especially coming from you. Those Rollergames fades are ridiculous!

• RFS
  25K+ 66 dy

  Anybody in Canada have any pins they want to sell? Post #24727 in topic

  Posted 66 days ago by Gunner007 – in Regional for sale threads ‐ Last reply today

  Kind of like we talked an about, for a long distance purchase , it’s a big red flag for me if they don’t have at least one pinside/Pinrev or active pinball community reference Did he send a video of the game and also mentioning you by name in the video. I’m curious if the scammers actually have the game they are selling Like I said I asked for pictures of specific items he did send them. But to many other flags. To bad. But in one way good. I'm going to sell my rollergames before buying a JP.

• ALL
  208 67 dy

  Ohio Pinball Owners Club Post #200 in topic

  Posted 68 days ago by mrm_4 – in All Pinball ‐ Last reply 66 days ago

  This Rollergames is kicking my ass but I’m progressing… https://pinside.com/pinball/forum/topic/dont-flip-flip-rollergames-restoration

• ALL
  6K+ 68 dy

  3D printing sharing thread.... Lets better the hobby Post #6577 in topic

  Posted 68 days ago by Gunner007 – in All Pinball ‐ Last reply today

  ... let the companies try to turn a profit. If you have anything for older williams, whirlwind rollergames, umtraman or ironmaiden I'd be happy to use an stl for my personal use.if you ...

• ALL
  64 69 dy

  If you had to only have 4, which would you pick? Post #46 in topic

  Posted 70 days ago by Shogun00 – in All Pinball ‐ Last reply 68 days ago

  That's easy! The 4 that are in my collection. Rollergames Robocop Jurassic Park (Data East) Black Knight: Sword of Rage

• EV
  258 69 dy

  Midwest Gaming Classic 2024 Post #239 in topic

  Posted 70 days ago by Gornkleschnitzer – in Events ‐ Last reply 64 days ago

  ... under control, dutifully resetting them in a split second if a lockup is detected. He's a good boy! Rollergames, Big Guns, and BK2K all ran beautifully as well, no issues from any of them ...

• CLB
  4K+ 71 dy

  Space Station Club... Members Only! Post #4175 in topic

  Posted 72 days ago by Ive – in All clubs (...members only!) ‐ Last reply 19 days ago

  ... Freeplay40 for a Blue Right ramp already when he does another batch also. Had to let Rollergames go to fit this one in, I think that was an ok slot trade. Can't wait ... image][quoted image] Good trade imo . I have had my Station over 15 years now , I like Rollergames but I had had enough of it after just a few months .

• RFS
  20K+ 72 dy

  Official Wisconsin-Minnesota Thread Post #20687 in topic

  Posted 73 days ago by orangegsx – in Regional for sale threads ‐ Last reply yesterday

  If anyone is looking for a Rollergames I am thinking about trading mine, need to change up the line up a bit. I will be replacing the side art, it is a great players machine with normal wear. I'm open to all trade offers, projects, whatever. I like -35 and sys 11 games best.

• CLB
  1K+ 73 dy

  Rock, Rock, Rockin' Rollergames! (club) Post #1351 in topic

  Posted 74 days ago by Mitchbo – in All clubs (...members only!) ‐ Last reply 8 days ago

  ... ball under that piece but still haven't gotten around to it. Seems not uncommon, on Rollergames at least as I don't have tons of experience with this phenomenon on other games, that ...

• PFR
  8 76 dy

  Clearing playfield scratches Post #5 in topic

  Posted 76 days ago by mrm_4 – in Playfield restoration ‐ Last reply 70 days ago

  Welp ignore every thing I said because I’m doing my rollergames and I just did my final sanding and buffing and it’s look garbage. Massive scratches everywhere I tried to sand them out like 5 different times and it just gets worse and worse.

• EV
  258 76 dy

  Midwest Gaming Classic 2024 Post #112 in topic

  Posted 77 days ago by Gornkleschnitzer – in Events ‐ Last reply 64 days ago

  I'll be there Friday as bright-and-early as I can reasonably manage. Just got my lineup confirmed with the arcade department: - Undertale (obviously) - Big Guns (the same one I bought there last year but with a bunch of stuff fixed) - Volcano Blast! (a very unfinished homebrew but you can play a full game and I will be scrambling to add more features until the last moment) - Rollergames (battle-tested on route at my workplace) - Black Knight 2000 (I finally added LEDs) Can't wait to see y'all at the show!

• ALL
  4K+ 77 dy

  Pinball in movies or TV shows? Name a game you have seen in the background? Post #4768 in topic

  Posted 77 days ago by pinball2020 – in All Pinball ‐ Last reply today

  ... in the picture is not a Rollerball (You are right, I goofed in the name, I had meant Rollergames). It looks like it is a Meteor. :) As for any other machine or piece of machine ...

• ALL
  6K+ 77 dy

  3D printing sharing thread.... Lets better the hobby Post #6496 in topic

  Posted 77 days ago by Gunner007 – in All Pinball ‐ Last reply today

  ... . Played with tinker today for a few hrs. Going to try and make a tunnel for the rollergames ball shooter lane.

• HGR
  60 77 dy

  4 Pins or less club - Tiny House Edition Post #27 in topic

  Posted 78 days ago by Shogun00 – in All gameroom talk ‐ Last reply 38 days ago

  I have enough room for 4 pins in my tiny home game room. Currently, I have 3 pins (Rollergames, Robocop, BK:SOR) with a 4th one (Jurassic Park DE) coming in on Wednesday. I'm not likely to switch any out, since I focused on nostalgia when I made my purchases.

• ALL
  6K+ 78 dy

  3D printing sharing thread.... Lets better the hobby Post #6485 in topic

  Posted 78 days ago by Gunner007 – in All Pinball ‐ Last reply today

  ... those videos would be hours. I've been trying to figure out making a tunnel for my rollergames shooter lane, or a bridge for UM and even scanned some plastics that were broken. But ...

• RSD
  262 78 dy

  Don’t Flip… FLIP! - Rollergames Restoration Post #170 in topic

  Posted 79 days ago by aamauzy – in Restorations documented ‐ Last reply today

  ... when the ball hit it! Unfortunately, I think people at this point have played WAY more Rollergames with crappy diverters than nice diverters.

• EV
  94 78 dy

  Midwest Gaming Classic 2024 - Buy/Sell/Trade/ISO Post #46 in topic

  Posted 79 days ago by HHaase – in Events ‐ Last reply 71 days ago

  Anybody need a pair of Williams 7-digit displays for a late sys-6 or sys-7 game? Can bring them with me, free if you need them. Also have the display control board for these too. Also have a system-11 display from my rollergames. I don't know if the display was going bad or the HV on the power supply. Works fine after about 15-20 minutes with all the digits looking fine. Also free if anybody wants it, otherwise I'm going to junk it.

• RSD
  262 79 dy

  Don’t Flip… FLIP! - Rollergames Restoration Post #166 in topic

  Posted 79 days ago by mrm_4 – in Restorations documented ‐ Last reply today

  Lately I’ve been watching tons of game play videos of Rollergames to keep myself motivated. One thing that I’ve been obsessing over is the ramp diverter. ... the arms. It literally lines them up to the corners [att=8103798,3836759 caption=""] Any Rollergames fan knows of the diverter bulletin and correction. https://www.ipdb.org/files/2006/SS64 ...

• TTS
  794 82 dy

  Silhouette Cameo Pinball Restorers Club! Post #778 in topic

  Posted 82 days ago by mrm_4 – in Tools & Supplies ‐ Last reply 11 days ago

  I have done it. Found it very hard to cut all the way through but with 2 passes it worked out. Kinda cool to be able to cut mylar so that the edges align perfectly with the shape of the art, which helps disguise it better. I planned on doing this on my Rollergames in the ball drop areas

• TGE
  12 84 dy

  Rollergames Ramp Diverter Logic Discussion Post #5 in topic

  Posted 85 days ago by Garrett – in Tech: Generic ‐ Last reply 85 days ago

  Very nice! Looking forward to seeing the progress. Looking at the rule sheet, it's not easy to parcel out the diverter logic. http://www.pinball.org/rules/rollergames.html That is a really cool diverter design, lots of options in a minimal space.

• TGE
  12 84 dy

  Rollergames Ramp Diverter Logic Discussion Post #1 in topic

  Posted 85 days ago by mrm_4 – in Tech: Generic ‐ Last reply 85 days ago

  ... and I’m interested in the logic of this diverter. I’ve read through the rollergames club thread and there are tons of posts around adjustments and cleaning and replacing worn ...

• RSD
  249 87 dy

  Adventures with PinballMikeD Post #128 in topic

  Posted 87 days ago by mrm_4 – in Restorations documented ‐ Last reply 9 days ago

  Damn man you and HEP with these cabinets! :applause: I’m terrified to even start on my Rollergames cab when I look at how good this one is going. I hate sanding with all my soul

• RSD
  249 3 mo

  Adventures with PinballMikeD Post #120 in topic

  Posted 90 days ago by PinballMikeD – in Restorations documented ‐ Last reply 9 days ago

  Love this thread man. Everything looks so good! Thanks, I just hope my playfield turns out as nice as your Rollergames.

• RSD
  262 3 mo

  Don’t Flip… FLIP! - Rollergames Restoration Post #148 in topic

  Posted 91 days ago by High_End_Pins – in Restorations documented ‐ Last reply today

  This looks really good. One of the better efforts I’ve seen. These Rollergames playfields are tough. You are not going to easily deal with all the challenges they bring from the neon colors to the fades to those company logos. It’s a huge task you are doing it so well with what you have to work with it’s impressive.

• ALL
  28K+ 3 mo

  What machine did you bring home today? Post your pictures! Post #28473 in topic

  Posted 92 days ago by aamauzy – in All Pinball ‐ Last reply today

  F14 [quoted image] Needs more Rollergames. Congrats!

• ALL
  2 3 mo

  learning playing with and without center posts Post #1 in topic

  Posted 92 days ago by derfske – in All Pinball ‐ Last reply 92 days ago

  ... be the only one with this right? my first 3 games had no centerposts now my rollergames has. now i have the problem i try to save it with a nudge and a flipper. and because ... again on my other games without a centerpost. i tried to not nudge the machine on the rollergames so much. i feel like its screwing up my plays LOL i need to learn the nature ...

• RFS
  20K+ 3 mo

  Official Wisconsin-Minnesota Thread Post #20639 in topic

  Posted 97 days ago by Bohdi – in Regional for sale threads ‐ Last reply yesterday

  Looking to trade a pretty decent Police Force for ? Just looking to mix it up a bit. Open to most title in similar price range. Maybe another system 11. Really like to get another Rollergames, but open to anything

• TGE
  25 3 mo

  Rollergames Background Music Post #24 in topic

  Posted 97 days ago by Pinwizkid – in Tech: Generic ‐ Last reply 97 days ago

  ... 11 games with unused complete music tracks are Swords of Fury, Police Force, and now Rollergames. Oddly, I went down this rabbit hole again today (after a whole decade) because this news clip ... while Steve Kordek is showing the reporter the Williams showroom. I was like... that sounds like Rollergames, except not? That lead me back here, so belated thanks for sharing! :D https://youtu.be ...

• EV
  94 3 mo

  Midwest Gaming Classic 2024 - Buy/Sell/Trade/ISO Post #22 in topic

  Posted 99 days ago by HHaase – in Events ‐ Last reply 71 days ago

  I might be going, still undecided, but will be potentially be bringing my Rollergames with me if I can get a couple things sorted in time. Not with the intent to sell, but could be talked into the right deal if I see a machine I like available. Looking for BK2K or Space Station. I'll also possibly be in the market for a -35 bally game for product development work.

• EV
  184 3 mo

  TPF 2024 Buy/Sell/Trade Post #114 in topic

  Posted 100 days ago by aamauzy – in Events ‐ Last reply 92 days ago

  I could be tempted by some of the following if anyone's looking to sell... - Oktoberfest - Hot Wheels - Bond (Pro) - Rush (Pro) The lack of Rollergames in this list is disturbing ;)

• CLB
  4K+ 3 mo

  System 11 Club ! Post #4505 in topic

  Posted 101 days ago by BertoDRINK1 – in All clubs (...members only!) ‐ Last reply 6 days ago

  Added a nice Space Station to collection that already had a NOS Playfield installed that looks great. Had to let Rollergames go to fit it in but a system 11 for another system 11 is still a good trade. I'll probably try my first LED OCD in this, it does a lot of fading and want to see how the do in person. [att=8065582,3805503 caption=""][att=8065582,3805501 caption=""][att=8065582,3805500 caption=""][att=8065582,3805502 caption=""]

• CLB
  4K+ 3 mo

  Space Station Club... Members Only! Post #4168 in topic

  Posted 103 days ago by BertoDRINK1 – in All clubs (...members only!) ‐ Last reply 19 days ago

  ... Freeplay40 for a Blue Right ramp already when he does another batch also. Had to let Rollergames go to fit this one in, I think that was an ok slot trade. Can't wait ...

• CLB
  850 3 mo

  Mata Hari Club - EM and SS - All Are Welcome Post #825 in topic

  Posted 104 days ago by mrm_4 – in All clubs (...members only!) ‐ Last reply 38 days ago

  ... thick it is - if it's thick like Rad Decals, it might be ok). I got his rollergames cabinet decals. They look great but we will see how things are after I get them ...

• RSD
  262 3 mo

  Don’t Flip… FLIP! - Rollergames Restoration Post #126 in topic

  Posted 104 days ago by mrm_4 – in Restorations documented ‐ Last reply today

  Small world. Beautiful Jacksonville!!! :-(( I should’ve stayed in Ohio. I could’ve clear coated rollergames today. [att=8060233,3800969 caption=""][att=8060233,3800970 caption=""]

• CLB
  2K+ 3 mo

  JJP Elton John Official Owners Club Post #597 in topic

  Posted 108 days ago by Pinballomatic – in All clubs (...members only!) ‐ Last reply yesterday

  Does anybody know if the SUPERSTAR on the CE topper is interactive with the game or is it just a sign that says SUPERSTAR It's a carryover game to game feature like on Rollergames and BK2K.

• MFS
  2 3 mo

  For sale: Rollergames Post #2 in topic

  Posted 109 days ago by RVApinballer – in Pinball machines for sale ‐ Last reply 109 days ago

  Good looking game. Nice cabinet for a rollergames. Also, good seller. Nice guy who makes sure the buyer is happy.

• EV
  258 3 mo

  Midwest Gaming Classic 2024 Post #58 in topic

  Posted 111 days ago by goatdan – in Events ‐ Last reply 64 days ago

  ... Drivin, Iron Man, Ghostbusters Premium, Count-Down, Gladiators, Demolition Man, Avatar, Houdini, Judge Dredd, Airborne, Rollergames, Starship Troopers (maybe even 2 or 3 of them! I seem to accumulate these oddly!), Stargate, 3 Coins, Spanish ...

• ALL
  4 3 mo

  Who on this forum sells shooter lane protectors ? Neon colored Plastic Post #2 in topic

  Posted 111 days ago by Gunner007 – in All Pinball ‐ Last reply 111 days ago

  I could use one for my rollergames.

• CLB
  8K+ 3 mo

  Nor Cal Pinheads thread Post #8295 in topic

  Posted 111 days ago by flipkidflip – in All clubs (...members only!) ‐ Last reply 2 days ago

  A classic like Rollergames would add some variety to that lineup. Hah, did you mention that because he just posted a Rollergames ad, or just a coincidence? https://pinside.com/pinball/market/classifieds/ad/173024 I'm with you though... put it in Game On!

• CLB
  8K+ 3 mo

  Nor Cal Pinheads thread Post #8291 in topic

  Posted 111 days ago by bdash – in All clubs (...members only!) ‐ Last reply 2 days ago

  A classic like Rollergames would add some variety to that lineup.

• CLB
  5K+ 3 mo

  Whirlwind Club... Members Only! Post #5352 in topic

  Posted 114 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply 9 days ago

  I'm not able to find the 18v test point? But I pulled j6 j7 and checked continuity of the transistors. Ill upload a video shortly. I may be doing it wrong let me know. Also Standing between my whirlwind and rollergames I touched a side rail from each machine and I'm getting a constant shock? Try this: It's WPC but it should apply to NPN Darlington pair transistors.

• ALL
  6K+ 3 mo

  3D printing sharing thread.... Lets better the hobby Post #6338 in topic

  Posted 115 days ago by sandro – in All Pinball ‐ Last reply today

  Thanks I don't 3D print but I have a friend that does. I guess I need to figure out how to or what I'd like as key chains for my whirlwind and rollergames. Whirlwind could be pretty straight-forward. I’m not sure what I’d do for rollergames, maybe a roller skate? I might be willing to create some key fobs. Would 2D designs be better, or are you looking mostly for 3d?

• ALL
  6K+ 3 mo

  3D printing sharing thread.... Lets better the hobby Post #6311 in topic

  Posted 116 days ago by Gunner007 – in All Pinball ‐ Last reply today

  Thanks I don't 3D print but I have a friend that does. I guess I need to figure out how to or what I'd like as key chains for my whirlwind and rollergames. Scroll back to page 126, I just made some. Flip Flop, Tropic Isle, and Fireball

• CLB
  1K+ 3 mo

  Rock, Rock, Rockin' Rollergames! (club) Post #1332 in topic

  Posted 117 days ago by harig – in All clubs (...members only!) ‐ Last reply 8 days ago

  Can you guys tell me where those parts should go? The clear plastic I assume sits somewhere on the playfield. Does that metal part also belong to rollergames? I found it in the coinbox... [quoted image][quoted image] found the location for the metal part: https://pinside.com/pinball/forum/topic/rock-rock-rockin-rollergames-club/page/18#post-5250860 just wondering where the clear plastic goes

• CLB
  1K+ 3 mo

  Rock, Rock, Rockin' Rollergames! (club) Post #1331 in topic

  Posted 117 days ago by harig – in All clubs (...members only!) ‐ Last reply 8 days ago

  Can you guys tell me where those parts should go? The clear plastic I assume sits somewhere on the playfield. Does that metal part also belong to rollergames? I found it in the coinbox... [att=8040896,3783374 caption=""][att=8040896,3783373 caption=""]

• CLB
  1K+ 4 mo

  Rock, Rock, Rockin' Rollergames! (club) Post #1326 in topic

  Posted 123 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply 8 days ago

  There is a company that does make a pretty good looking one. World alliance of rollergames. No

• CLB
  1K+ 4 mo

  Rock, Rock, Rockin' Rollergames! (club) Post #1325 in topic

  Posted 123 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply 8 days ago

  Thanks I'm not very good with graphic software but I'm going to see if I can merge those two images. I have seen a topper someone makes With the world alliance of rollergames. It looks good. I'd Like to see if I can make one. Thanks those images might work. So I’m not sure of this is the “topper” for this game or not. It came with the CPR repo plastics. [quoted image][quoted image]

• PFS
  947 4 mo

  Trade your Plastics Post #931 in topic

  Posted 130 days ago by Gunner007 – in Pinball parts for sale ‐ Last reply 3 days ago

  ... scans of plastics you would share? Not sure if It's been asked but I'm looking for rollergames and whirlwind But wait, still not done. Now a sharp razor blade is used on the ...

• TGE
  14 4 mo

  Whirlwind plastic scan needed Post #13 in topic

  Posted 130 days ago by Gunner007 – in Tech: Generic ‐ Last reply 129 days ago

  Old thread revival again. Anyone have scans of rollergames or whirlwind plastics. I'm just playing around with software and seeing what I am able to do on my own. Thanks

• CLB
  1K+ 4 mo

  Rock, Rock, Rockin' Rollergames! (club) Post #1317 in topic

  Posted 131 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply 8 days ago

  ... one was adding new speakers, a crossover and an L-Pad to even out the sounds. Well Rollergames sounds a lot better, louder and you can feel the bass now in the box a bit ...

• !!
  32 4 mo

  Data East Time Machine - CPR Plastics - Interest? Post #32 in topic

  Posted 136 days ago by Gunner007 – in New parts announcements ‐ Last reply 136 days ago

  revive Has anyone tried to scan their plastics and send them to a printing service on acrylic? I'd give it a shot to see how it works. 1 I don't have an original scan of all the plastics for rollergames or whirlwind. But I'm also wondering how, when printed they would be the correct size? I've been looking at places like https://creativesilhouettes.ca/product/photo-print/?gclid=Cj0KCQiAn-2tBhDVARIsAGmStVkklZk3nlGq44C0uuhqR1YL9HahVv-Ekyc4EDy4wddhnP1RIivp6RcaAuYxEALw_wcB Sure beats $200 for a set.

• TAN
  4 4 mo

  Rollergames Lower Playfield GI Post #1 in topic

  Posted 136 days ago by Swampy2016 – in Tech: Alpha-numeric ‐ Last reply 136 days ago

  Hello, I have been working on a #Rollergames getting ready to sell and I am having an issue with the lower playfield GI blowing ...

• MFS
  2 4 mo

  For sale: Rollergames Post #2 in topic

  Posted 137 days ago by Bohdi – in Pinball machines for sale ‐ Last reply 137 days ago

  Good luck with the sale Jason. Solid price IMO. Kinda miss my Rollergames...

• TGE
  7 4 mo

  Williams system 11 Speaker upgrade wiring (backbox connection) Post #7 in topic

  Posted 138 days ago by Gunner007 – in Tech: Generic ‐ Last reply 138 days ago

  ... anyone has a newer parts list to update this thread. I started to do this on my rollergames. New sub 2 new speakers in the upper cabinet. I'm in the process of finally getting an ...

• CLB
  5K+ 4 mo

  Whirlwind Club... Members Only! Post #5261 in topic

  Posted 138 days ago by Gunner007 – in All clubs (...members only!) ‐ Last reply 9 days ago

  ... and play as well. I'll have to do some reading about the diamond plating. My rollergames has mylar. I wonder if some decals on the play field that look worn can just ...

• ALL
  26 4 mo

  5/10 year dead, alive, newborn, merger Post #3 in topic

  Posted 138 days ago by aamauzy – in All Pinball ‐ Last reply 137 days ago

  ... position Cactus Canyon as the new "21,000 units sold" game. Pedretti gets smart, makes Rollergames 2.0, and gains notoriety for making a truly successful 2.0. (Pedretti pls - RG2.0) Dutch is hanging on for ...

• BUY
  51 4 mo

  Newbie looking to enter the scene Post #50 in topic

  Posted 141 days ago by Gunner007 – in Buying and selling advice ‐ Last reply 140 days ago

  ... . This could have been my post, thanks. I am in the same boat, although I did buy rollergames I am looking for another or 2. I'm in Kingston Ontario and many machines are a drive, so local ...

• RFS
  25K+ 4 mo

  Anybody in Canada have any pins they want to sell? Post #24363 in topic

  Posted 141 days ago by Gunner007 – in Regional for sale threads ‐ Last reply today

  ... me in on titles you think are in those eras, fun, difficult, multiball and ramps. Rollergames has been a blast.

• ALL
  13 4 mo

  Sequels to games and the originals - do you have both? Post #8 in topic

  Posted 141 days ago by EJS – in All Pinball ‐ Last reply 141 days ago

  Have both high speeds 1 and 2 both will stay. Sold high speed twice in my life so now having it a 3rd time learned my lesson. Also have Rollergames I like to call high speed 1.5 Have T2 would be nice to have a T3 again. Have Pinbot and BOP. Sold Jackbot awhile back since it’s so similar to Pinbot but still appreciated its differences. Also have the trio of Comet Cyclone and Hurricane. Have Black Knight. 2000 is on the list to buy.

• BUY
  1K+ 4 mo

  Pinball price BUBBLE ... think it can't happen? THINK AGAIN! Post #1016 in topic

  Posted 142 days ago by Gunner007 – in Buying and selling advice ‐ Last reply 110 days ago

  ... military and found myself looking for a hobby. LOL I found it but it isn't cheap. I found a rollergames for a decent price and am happy with it. But want to add a newer title, like ...

• RSD
  262 4 mo

  Don’t Flip… FLIP! - Rollergames Restoration Post #112 in topic

  Posted 143 days ago by mrm_4 – in Restorations documented ‐ Last reply today

  Wanna redo mine? Mine has wear in a lot of the areas you’ve fixed! [quoted image][quoted image][quoted image][quoted image] Man that wear is almost identical. I gotta say after this project is done I don’t see myself rushing to do another Rollergames. This is a grind.

• RFS
  7K+ 4 mo

  Colorado what's fs/ft Post #7273 in topic

  Posted 143 days ago by jrcmlc – in Regional for sale threads ‐ Last reply 2 days ago

  ... trades as much or more than selling, wish list is current. South Park, indy 500, rollergames, ccr SE, Imdn Pre, LZ Pre, others.

• EM
  26 4 mo

  German Press-Photos and Magazine-Reports from 1959 onwards Post #21 in topic

  Posted 144 days ago by Mardi-Gras-Man – in EM Pinball Hangout ‐ Last reply 22 days ago

  ... -Pound-Gorilla" for Williams. Rosenzweig later had a Beard and was depicted on the Playfield of Rollergames. [att=7996367,3747647 caption=""][att=7996367,3747646 caption=""] [att=7996367,3747653 caption=""]

• CLB
  1K+ 4 mo

  Rock, Rock, Rockin' Rollergames! (club) Post #1296 in topic

  Posted 144 days ago by JeffZee – in All clubs (...members only!) ‐ Last reply 8 days ago

  Last year I was able to replace my SKATE targets with a drop target bank. It turned out well enough, but probably not worth the effort. It was a lot of work, the parts are hard to come by and it doesn't really change game play. In any event, the information I gathered is at the following link under April 2023. http://www.jeff-z.com/pinball/rollergames/repair/repair.html [att=7995035,3746843 caption=""]