Ray Twp., MI
Quoted from Friengineer:How do you remove/disable the reset board in a system 80B game?
Just unplug it.
(Topic ID: 73213)
Linked Games
Alien Star
Gottlieb, 1984-
Arena
Gottlieb, 1987
-
Asteroid Annie and the Aliens
Gottlieb, 1980
-
Bad Girls
Gottlieb, 1988
-
Big House
Gottlieb, 1989
-
Black Hole
Gottlieb, 1981
-
Bone Busters Inc.
Gottlieb, 1989
-
Bounty Hunter
Gottlieb, 1985
There are more than 8 games linked to this topic.
Click here to show all linked games
Click here to show all linked games
Topic Gallery
You're currently viewing posts by Pinsider crlush.
Click here to go back to viewing the entire thread.
Quoted from PinB:Motor that reveals figurine under playfield isn't working
Use your finger and try to turn the motor gears, its kind of hard but if you cant then you might have a tight bushing, i had to unsolder remove the unit and add some penetrating oil on the bushings overnight then work the gears with your fingers. The leaf switch on the unit should be closed to run, you can actuate the motor buy pressing in the solenoid at the bottom of the playfield.
2 months later
Quoted from Chitownpinball:I also seem to have a light locked on (plane shaped adv multiplier). I used psd4me's driver board but that changed nothing. Was hoping it was a bad transistor.
Never worked on a gold wings but gottlieb put transistors all over the place as they ran out of room on the driver board, just follow the wires and see where they go, i had 6 shorted transistors under a playfield of a monte carlo.
1 week later
I know someone thats looking for one, but i don't think he will be at pinfest.
Quoted from Gerry:I have a MC topper and can bring it to pinfest if anyone would like it...$250 LMK
2 months later
Quoted from seshpilot:Got a weird problem I could use some help with: when the game boots up on my TX Sector, the display goes out half the time when the solenoids fire upon initial boot. I have to reset and try again; sometimes it works, sometimes it doesn't. Seems like it's robbing the display of power but not sure what to do. Increase 5v supply on power supply? Thanks!
Better measure what you have now
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider crlush.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
