Quoted from Fytr:It sounds nuts but evidence is evidence.
Where does one acquire one of these mystical plasic wedges?
https://www.amazon.com/Shepherd-Hardware-9435-Wedge-Plastic/dp/B007ZUDT1K/ref=mp_s_a_1_4
You're currently viewing posts by Pinsider Pinzzz.
Click here to go back to viewing the entire thread.
Quoted from Fytr:It sounds nuts but evidence is evidence.
Where does one acquire one of these mystical plasic wedges?
https://www.amazon.com/Shepherd-Hardware-9435-Wedge-Plastic/dp/B007ZUDT1K/ref=mp_s_a_1_4
Quoted from BMore-Pinball:Have issue with this sleeve post sliding up and not letting ball rolling
[quoted image][quoted image]
Pull the black sleeve off...then wrap one turn of electric tape around the metal post, then slide the black sleeve on over the tape. fixed!
Quoted from pduffy:I figured it out. The pin holding the ramp in does not have a c clip on one side
I have had to replace one right side c clip in the few years of my ownership.
You're currently viewing posts by Pinsider Pinzzz.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/iron-maiden-issues?tu=Pinzzz and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.