OMG OMG OMG Image from iOS (6) (resized).jpg

your EOS switches look very worn. If they can't pass the current the pull in coil won't work and the hold coil doesn't have the strength to do so. You can test this by using a jumper wire across the EOS. If it works then you know the EOS is the problem. DO NOT Hold the coil or leave the jumper wire on or you can burn up the coil. This is for quick flips only to verify the switch is the problem

Looks so good cleared. I'm going to let it cure for a couple months before I swap.

PXL_20210110_011410508 (resized).jpg

PXL_20210110_011430198 (resized).jpg

Gonna wing this out here and see if anyone knows how many posts on Laser Cue? Or does anyone have a playfield chart or link to the parts book for late system 7s? Thanks

I had created another thread and got some info there. Thanks

https://pinside.com/pinball/forum/topic/laser-cue-parts-catalog-post-counts-and-rubber-chart

Got the game back, tracking down a switch row locked on. But it's ok just to look at for a while
PXL_20210906_221954530 (resized).jpg

Finding an NOS playfield and having it cleared practically guarantees a repro is coming soon

I am having an issue on my laser cue where a power left outlane drain jumps over the outhole switch and has enough momentum to end up in the shooter lane.

I see there is a hole for a post but my new and old playfields never had anything there.

Does anyone have a post hers? Can you post a pic? The hole is really close to the trough and I worry about it preventing the ball from exiting if I use a star post

Thanks

I put a skinny post on there (no rubber) and it seems.to have helped