Genesis plastics are spoken for.
I'm interested in 80's and 90's project machines (Williams/Bally/Data East/Sega). I've never been to Pinfest -- is it common for people to bring / sell project machines?
Quoted from mdmitch2:I'm interested in 80's and 90's project machines (Williams/Bally/Data East/Sega). I've never been to Pinfest -- is it common for people to bring / sell project machines?
Yes, but it's random how many there will be there. Some years have many more than others and the good deals tend to go fast. Depending on the title, don't be surprised to see fairly high prices on games that need *a lot* of love.
Quoted from mdmitch2:I'm interested in 80's and 90's project machines (Williams/Bally/Data East/Sega). I've never been to Pinfest -- is it common for people to bring / sell project machines?
Yes, but bear in mind everyone and there mom is looking for project 80s / 90s machines. I scored a semi-project Bad Cats project at the York show last year. Your best bet would be to search through this thread and PM anyone with stuff you are interested in.
Quoted from SantaEatsCheese:Yes, but bear in mind everyone and there mom is looking for project 80s / 90s machines. I scored a semi-project Bad Cats project at the York show last year. Your best bet would be to search through this thread and PM anyone with stuff you are interested in.
For the record, my mother knows nothing about pinball.
FS - Flying Carpet - complete cab repaint, new BGR back glass, new backdoor, new standoff's, pops, lane guides, lights etc. Legs, coin entry and door powder coated. All done in 2017 - Looks and plays GREAT!!
PXL_20220403_224530710 (resized).jpgPXL_20220403_224554669 (resized).jpgPXL_20220403_224600492 (resized).jpgPXL_20220403_224608613 (resized).jpgPXL_20220403_224650882 (resized).jpgPXL_20220403_224656708 (resized).jpgPXL_20220403_224721341 (resized).jpgPXL_20220403_224917092 (resized).jpgLooking for the following:
New Creature playfield
New Ghostbusters premium playfield
1963 lockdown bar for a Gottlieb Swing Along
I’ll be there Thursday setting up until show ends.
Thanx, Bruce
Used original twilight zone playfield. Can deliver to allentown,
https://pinside.com/pinball/market/classifieds/ad/153974
Magnetic Speaker Light frames for Foo fighters.
pasted_image (resized).pngpasted_image (resized).pngpasted_image (resized).pngJust posted my Led Zep Pro FS. $6,000 firm with lots of mods, including topper and expression lights. Will be bringing to Pinfest if it doesn't sell before then.
Quoted from dmacy:Also found a Roadblasters daughter card that I’ll bring. I’m officially ready for Pinfest now.
[quoted image][quoted image]
Nice shirt!
Quoted from Pbpins:Extremely nice used set of 27” legs!!!
They look great. I need 28-1/2" chrome legs for my 1971 Williams Olympic Hockey.
Quoted from SantaEatsCheese:It's supposed to pour here and I got a dirt hill so... we are packed up early! Weird Al/ Heist for Freeplay, Bond Premium for the tourney, NBA Jam for freeplay ($200) and Dr Who is hitching a ride with me for a friend.
[quoted image]
Very cool man. I can't wait to play your Weird Al. We know what happened when I played your R&M.....
Grand Slam backglass, would make a great wall hanger. I'll be at the show on Friday if you're interested.
If the weather is good, I could fit another game. Could bring Cactus Jacks if weather holds up or if LCA sells Friday. Wouldnt plan to sell but will have a “if you offered this I would t say no” price.
7259116A-86FF-4D31-BD73-AC96EE798B17 (resized).jpeg9EF70ACF-F315-40CA-AF77-066737D03D06 (resized).jpegA10E62C7-DB49-4BB5-B620-EDC5D56381C7 (resized).jpegCEC279F3-E06A-425E-983B-41E55084997A (resized).jpegDE996193-CC78-45BA-BFB5-B422C0D7662D (resized).jpegE391867B-42B0-47AC-8BE6-05276A8A069A (resized).jpegE7ED608F-79F6-417F-A31A-CDA46F9999CA (resized).jpegQuoted from ibuypinballs:Shopped, full Comet STD2 leds, flippers rebuilt, some new plastics. New ball plunger and coil. One new flipper opto board, reel belt replaced and fresh rubber. Topper in excellent condition. Also comes with a NOS apron, not installed. [quoted image][quoted image]
Someone buy this and sell me the NOT nos apron please.
Quoted from DorkInAbox:Someone buy this and sell me the NOT nos apron please.
Digging through some bins and found the following items that might be of use some people. Items must be prepaid (due to border).
WMS Apron (Sys11?) - $20
Used Popeye Trough (a-17505) - $30 (on hold)
Used Demolition Man 'scoop' - $30
Dolly Parton light board - Sold
Dolly Parton pop caps - $10
WMS Fan-Tas-Tic roulette wheel - $30
Used Lectronamo plastics - $20
Used Dolly Parton plastics (one is broken) - $20
20230410_183606 (Small) (resized).jpg20230410_183632 (Small) (resized).jpg20230410_183640 (Small) (resized).jpg20230410_183657 (Small) (resized).jpg20230412_124018 (Small) (resized).jpg20230412_124032 (Small) (resized).jpg20230426_175018 (Small) (resized).jpg20230426_175112 (Small) (resized).jpg20230426_175354 (Small) (resized).jpg20230426_175423 (Small) (resized).jpg20230426_181648 (Small) (resized).jpg20230426_181733 (Small) (resized).jpg20230426_181745 (Small) (resized).jpg20230426_182714 (Small) (resized).jpg
Quoted from ibuypinballs:[quoted image]
That's too nice. Shoulda said I'm looking for a donor apron for my Road Show project that's totally missing one. I wouldn't want to repaint a perfectly nice FT one. Someone contacted me already though, so think I found my donor apron.
Quoted from mdmitch2:I'm interested in 80's and 90's project machines (Williams/Bally/Data East/Sega). I've never been to Pinfest -- is it common for people to bring / sell project machines?
Really wish there was an area to buy and sell project machines. As it is now, you’re stuck buying a whole flea market space or fixing it up just enough to put it in the free play area (which it is obvious some folks do.)
It seems like this is another way the show could be being in revenue instead of folks resorting to parking lot deals. I would gladly pay a placement fee to let my project game sit in a designated show area for sale.
Quoted from Gotemwill:Really wish there was an area to buy and sell project machines. As it is now, you’re stuck buying a whole flea market space or fixing it up just enough to put it in the free play area (which it is obvious some folks do.)
It seems like this is another way the show could be being in revenue instead of folks resorting to parking lot deals. I would gladly pay a placement fee to let my project game sit in a designated show area for sale.
It’s all about space only so much of it!
Like Ivan said “looks like we need a bigger bld” (boat)
I am sure one of the vendors in the flea market would let you put a game in their booth for a small fee. No different than what you are thinking. Some of the spots have very little in them.
Quoted from Pinballflare:I am sure one of the vendors in the flea market would let you put a game in their booth for a small fee. No different than what you are thinking. Some of the spots have very little in them.
Great suggestion!
Most, if not all flea market vendors are pretty cool.
They may require a cold beverage and or a pretzel wrap
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pinfest-2023-buy-sell-trade-want-no-hotel-talk/page/33?hl=duderegular and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.