Juelich
great news, cant wait !
(Topic ID: 259041)
Linked Games
Elvira's House of Horrors (Limited Edition)
Stern, 2019-
Elvira's House of Horrors (Premium Edition)
Stern, 2019
Topic Gallery
You're currently viewing posts by Pinsider sirlonzelot.
Click here to go back to viewing the entire thread.
1 week later
Got the parts today. Wow they looks really well done. Fits so good to the game. Thanks for the great job
But I have a problem with the Vuk after installing. It’s not hitting the targets anymore. The ball is distracted to the right (outlane). When I remount the mod it hits the targets again. I made a slow motion video and it seems that it hit the left tooth and that’s the reason why it’s distracted.
There’s not much adjustment to made. Any idea how to solve this problem ?
Thanks in advance
Quoted from Medisinyl:Out of about 250 gargoyle mods shipped now, only a few have reported an issue with the VUK trajectory. The ball shouldn't touch the mod at all.
Do you happen to have plastic protectors on your game that would raise the gargoyle higher than what I designed around?
sorry no. I try without the rubber (post) and try several vuk coil settings but all the same 
if you like I can Upload the slowmotion video
FBE599DE-BE09-4762-8106-995EF16840F2 (resized).jpeg
1 month later
Quoted from KlownHammer:Sirlonzelot you did a great job there with that! Are there little images that flip up underneath the hatches when they pop up too or was that my eyes playing tricks on me?
Yes there are deadheads on sticker that I had taken from the screen.
There is one led at the scoop and one Led strip in the casket. First I connected both to the gi. Now I change the led strip to the flasher near the casket, which gives it more effects
5F5F0A8C-E681-445B-8E16-6A4C83175204 (resized).jpeg939057CB-1893-4CBF-B1B0-EFD8A302DF33 (resized).jpeg
Quoted from KlownHammer:was that a pretty straight forward process? Like.. just leads from the strip clamped to the flasher wires
Yes was easy. Directly to flasher
2 months later
6 months later
2 weeks later
1 year later
2 weeks later
Quoted from Medisinyl:I suggested I may earlier on if there was interest.
With the clarity of the reveal, I could propose a special B/W, red glitter version at $429 + shipping (perhaps a 1 of 69 at most unless there's significantly more interest early on [hand numbered either way]).
Gray stone casket/gargoyle wall. Red glitter gargoyle eyes. Would have red glitter Elvira letters (Elvira font as prior LEs), and the lips/teeth image I had used a few times before (Goodhead, but without that text [glitter lips]). Red glitter Gonk lettering (black glitter roof). Morgana Tombstone (Elvira's Aunt that died for her to inherit the house and her familiar, Gonk). Amongst other details for the lids (undecided).
If there's interest, I'll start a separate list to see if it's worth doing.
ok move me to this list please
Quoted from Medisinyl:I suggested I may earlier on if there was interest.
With the clarity of the reveal, I could propose a special B/W, red glitter version at $429 + shipping (perhaps a 1 of 69 at most unless there's significantly more interest early on [hand numbered either way]).
Gray stone casket/gargoyle wall. Red glitter gargoyle eyes. Would have red glitter Elvira letters (Elvira font as prior LEs), and the lips/teeth image I had used a few times before (Goodhead, but without that text [glitter lips]). Red glitter Gonk lettering (black glitter roof). Morgana Tombstone (Elvira's Aunt that died for her to inherit the house and her familiar, Gonk). Amongst other details for the lids (undecided).
If there's interest, I'll start a separate list to see if it's worth doing.
Is there enough demand to start the list or did i miss it ?
1 month later
Quoted from Medisinyl:Next update will show the full set painted up (any day now).
Newest machine tested well and all settings dialed in to match the output of my existing machines (if not better). Should have my buddy set up with the machine at his place by tomorrow and show him how to prep the parts he'll be working on.
Will aim to crank these out in the short term as most Stranger Things parts are several sets ahead, so I'll put most of my machines on these early on to get the first color and B/W sets out ASAP (hopefully before Christmas for both those first runs of 15).
Great news !
4 weeks later
Promoted items from Pinside Marketplace and Pinside Shops!
West Des Moines, IA
You're currently viewing posts by Pinsider sirlonzelot.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
