(Topic ID: 215071)
Linked Games
Addams Family, The
Bally, 1992
Topic Gallery
You're currently viewing posts by Pinsider zaza.
Click here to go back to viewing the entire thread.
Quoted from Laithan:but how and where is this checked?
Inspect at switches #44, #64 and #74 the White-Yellow wire. This wire is jumping from switch to switch and when broken, all switches after (or included) that switch that use this wire, won't work.
You can test the plumb bob to be sure but could expect an error when switch #24 'always closed' was open all the time.
It looks like all switches on row4 on the playfield don't work. Could be a loose wire in the connector J208/209 pin4 or still a broken wire in the harness.
I don't know if switch#85 had something to do with the problem on switch #84. Maybe software disabled the 'thing' movement because it could not locate the position of the hand.
Promoted items from Pinside Marketplace and Pinside Shops!
Hanford, CA
Vancouver, BC
You're currently viewing posts by Pinsider zaza.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
