Royal Flush
Gottlieb, 1976My previously working royal flush has stopped responding.
When powered on the backbox lights are lit, but I get zero effect from the start button, coin mech switches etc.
I’m definitely a novice with em repair. This seemed like a blown fuse (it always does right?). But all fuses tested fine for continuity. I replaced every fuse I could find just in case (and checking against the schematic, I think everyone in the game). No change.
What do I do next?
Quoted from DrScoops:zero effect from the start button
If the Replay button doesn't activate the Replay Button (V) relay,
Inspect and diagnose this circuit with Alligator clip jumper wires
pasted_image (resized).png
https://pinside.com/pinball/forum/topic/gottlieb-big-shot-repair#post-6305153
http://www.planetimming.com/Pinball/troubleshooting/EM%20Troubleshooting.pdf
http://www.pinrepair.com/em/index3.htm#features
Example of a pinsider actually doing this https://pinside.com/pinball/forum/topic/red-baron-tech-question#post-5858156
Quoted from TheLaw:Tilts not stuck on. Including that weirdo kill switch on the bottom of the cab?
Edit: that's naturally closed?
Weirdo kill switch for the win! Thank you so much! All appears right with the world again!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/help-royal-flush-died and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Ann Arbor, MI
