Any help would be much appreicated, game reset once a few weeks ago on a very warm day so ordered a WPC Power Fix Daughterboard from Pinballlife. Today being a day of celebtration (b'day) so wanted to have a few games and quite a warm day mid 30's deg c and game reset straight away on turn on and somethimes when you play a game right at the beginning through to maybe a minute into the game. I pulled out the new WPC power fix board and install and still resets when playing.

any tips, only thing that I have done recently is flipper bats, coil sleeves and pivot bracket.

any help would be much appreciated

game is a CFTBL

cheers guys, currently only have the tail fin mod running off linked inserts and snackbar running off GI and poster static mod running off GI so not alot of mods

air was not one so game on in a mid to low 30 degree cel environment, as a nice sea breeze coming through.

I know the the wpc fix board is a band aid so will get the board serviced soon, more hoping to enjoy a few games today as down to one pin at the moment. I re-seated all the connectors on the dmd and driver board as the game hasn't moved or boards been touched for a few years (been hassle free) and managed to get a few games without issue so far with out the fix board installed. see how we go....

thanks for the feedback guys, much appreciated and will go through the guides over the next day or so to try and pin point a basic issue if any

are the tanalum caps the long white blockie components - sorry, should read the guide.

cheers guys, will look at it tomorrow