Hello All

Working on a Kiss Bally

Worked Perfect

Moved from my buddy to my place

Not no lamps on either driver work

Test Point 1 is 44vdc - should be in the 6vdc range

Any ideas why it would be so high ?

No controlled lamps work right now

If I play some I get a Super Bright flicker here and there

Let me know what to look for on this game I assume in the J3 connector on PSU Transformer

Thank you

I will add that I did replace the 3 connectors on the board as the J1 and J2 were burnt and the pins on the board

Also the headers on J3 but left connector alone as it was not burnt at all

So really I would assume in did something wrong and now I messed up the Voltage to feature lamps

Help me

Thank you I will double check this all again

Yes I had to remove the head

And I took pictures of my work before and after

But I'll check again

Worst case I'll order a new board

This one has tons of burnt pads and jumpers etc

Thank you all

IMG_4139 (resized).PNG