Quoted from Bryan_Kelly:Thank you!
I was very happy with Mirco's playfields. I LOVE the dimples on the topside. They're more like small craters. Because of the size, very little predrilling is needed and their location was spot on. I don't think I had an issue with any of them. That's a good thing because they would be tough to adjust because of their size.
The dimples on the bottom side are more like what you would expect...a small dimple. I'd say 99% of them were there and the ones missing, were simple to figure out. Only a handful had to be adjusted. The sling switches weren't quite square with the sling rubbers and there were a few for the various coil mechs that had to be moved slightly. Nothing earth shattering and all were easily done.
I'm used to doing WPC playfield swaps. This took about as much time. There's less on the playfield...there just happens to be 3 of them with this game.
I did my first Mirco swap on BSD and it was great. Playfield was perfect, dimples and holes were perfect. Made the swap a breeze compared to others I have done.
Thanks for posting the work Bryan.
