Here is what I've done so Far.
New Parts Listed below installed
IPC Playfield
Side rails
Lockdown bar
Steps and Horshoe Ramps
Both Shooter Rods
Cabinet Decals (less than perfect)
Pinbits Clear plastic set and protectors
3 Flipper Bats
Rubbers
Legs
LEDs in GI and Backbox. Some flashers upgraded to LED as well.
Dark Blue Pincab leg Protectors
Here is what I've done so far as well
Polished / Buffed lockbar mech, installed shop out decals
Buffed all Ball guides, and most metal parts
Pulled Driverboard and tested every transistor, and checked all the connectors.
Still testing it, and have a few more minor parts to get. (star posts, post screws, and I'm going to replace a lot of the hex nuts to finalize the polished metal look).
Test video I shot this AM. I will pull this video an update it probably tonight.
http://www.youtube.com/user/bundyeric?feature=mhee
Photobucket higher resolution, and some before and afters as well.
http://s818.photobucket.com/albums/zz104/eabundy/Funhouse%20Restore/
IMG_4093_(Large).JPG IMG_4104_(Large).JPG IMG_4087_(Large).JPG IMG_4090_-_Copy_(Large).JPG