$2900 OBO

INTRO

For sale is a very nice (Fully Working) Bally Judge Dredd Pinball. I’m selling this pin in addition to my Data East TMNT (see Marketplace for ad posted on 5-28-2000 for $2800). The reason I’m selling this machine in addition to my TMNT is to hopefully have enough to purchase the new Stern TMNT Pro. That is the only reason I’m selling these perfectly working pins. Also, I need to make space for the new pin. Let me know if you’re interested in purchasing both pins.
For additional cost, I have 4 new/spare flipper coils (for all 4 flippers) along with new links, springs, and plungers. I also purchased a replacement board for the deadworld globe position optos (underneath playfield, near motor). The board has not been added but can be purchased for an additional $30.
The Deadworld Mod is installed. Yes, it works perfectly; It rotates, and the crane picks up the balls and drops them in the correct location (no adjustments needed).
The previous owner LED’d this machine from top to bottom. Also, he installed a new coin door which does not close the high voltage switch. Electrical tape has been used over that switch to hold it down in order to power the coils during gameplay (minor item, but worth mentioning).
Buyer is responsible for shipping or pickup. I will work with any shipping companies that you hire to have pickup. I’ve used STI Beltmann and others.
I purchased this machine from a private seller a few months ago. I’ve made my way with improvements, getting this machine fully functional and looking good. I added a playfield protector as additional playfield protection. The original DMD plasma was replaced with a fully working DMD plasma display. Please see photos and ask me questions for more information.
The cabinet body is in very good condition. There are a few spots that show slight bubbles on the cabinet head side art. There are minor flaws in a few of the plastic ramps (minor cracks). Considering the age this machine, they are in good condition.
When requested, I will provide potential buyers with a video link showing gameplay.


MAINTENANCE

I have owned this machine for a few months. Since owning this pin, the following repairs/upgrades/maintenance were made:

2020-04-09
Replaced DMD. Vacuumed inside of cabinet.

2020-04-18
Removed playfield ramps/plastics/parts to clean playfield with Novus 2 and vacuum.
Installed new flipper coil stops, coil sleeves, and upper left flipper spring.
Replaced rubber rings and posts.
Installed new playfield protector.
Cleaned all flipper EOS leaf switch blades. Cleaned sw 61 globe position1 and 2 optos and board.
Cleaned top right return ramp opto.
Installed new batteries. Set time/date and freeplay.

2020-04-25
Replaced Supergame microswitch and diode, and was not necessary...because Plugged a single plug connector for J207-4 (yellow-white) which fixed Supergame.

2020-04-27
Replaced all 6 balls.

2020-05-06
Added mylar to shooter lanes.