Orlando, FL
Hi all just joined the club, put in a pinsound and added the TNA soundtrack and it’s awesome! Glad to be part of the team
(Topic ID: 40984)
Linked Games
-
Judge Dredd
Bally, 1993
Topic Gallery
You're currently viewing posts by Pinsider fielddog1.
Click here to go back to viewing the entire thread.
Quoted from Davi:Welcome! 4 times welcome
lol rookie mistake, my bad, had some trouble posting
1 week later
Hi all, having a bit of trouble with my right flipper. For some reason, I can’t cradle the bottom right flipper, when I hold the button it just does one hard flip then won’t stay up. The upper right flipper is working just fine. Luckily I own a World Cup 94 and tried the below remedies by trying out different parts but no success. Any advice would be greatly appreciated. Thanks all!
All items listed below I tried with no success 
1. Tested all optos in the test menu
2. Tried using right flipper opto board from WC94
3. Tried using fliptronics board from WC94
4. Replaced coil stop and EOS switch
5. Adjusted EOS switch every which way
Quoted from cynric:Either that or the corresponding power transistor on the Fliptronic board.
Everything else (wiring, transistor driver, logic) is rather unlikely.
I did try switching the fliptronics board from my WC94 machine and still same problem sadly.
Quoted from Jmckune:Did you replace the coil? Your hold winding could be broken.
Do haven’t tried that yet. I do already have a replacement coil so let me try that tonight and hope it works. Thank you!
Quoted from Jmckune:Did you replace the coil? Your hold winding could be broken.
Hi all, replaced the entire coil as well but still the same problem. Really not sure what else to diagnose, any advice is greatly appreciated. Thanks all!
So I did a continuity test with my multimeter on the J902 on the fliptronics board and found the wires that control the hold on the flipper. Did the continuity test and, nothing between Pin 11 and 13 while the others worked. So it must be a break in the wiring from the BB to PF.
I am not sure what to do now though, should I just try to follow the wires and see if there are any breaks? Thanks again!
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider fielddog1.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
