Looks like the yellow wire component to the playfield is out. Also some GI backbox lights are out as well. Kind of stumped. Did solder a light socket on the left side of the playfield back in place but that didn't change anything.

Checked continuity in the line on some of the contacts of the lights and there's a buzz for sure.

2014-01-19 16.41.33.jpg

All the fuses check out with the DMM. Reseated the J120 and J121 connections.

Same results. Even checked the contact points of the new area I soldered the socket light and there's continuity.

It was the fuse at 106 (under the DMD) in the schematics that was bad. Big burn mark right in the middle. Works fine now with a new 5A fuse.

Thanks for your help!

2014-01-19 17.43.25.jpg