So I have been scratching my head on this one for a couple days now. My heat shield light and mutli ball light keep flashing constantly seems to be tied to the tail insert lights in terms of the flashing. As well as having issues with all the other lights on column 1j7-1 besides the shoot again insert any ideas.

i made another post yesterday but i guess that it did not upload i noticed resistor(27ohm 2w +-5%) on that column was blown waiting on new one everything else seemed to be fine but the resistor. its not like the lights flash brighter or anything just constant flashing.

also noticed that when you get the multiplier up to 5x the 6 and 7x are lit but they are dim everything else on the column works just fine.

here is a link to a vid with the issues

So after some testing q15 and q24 failed tests. Going to swap them and the resistor and hopefully that will be the end of it. Thankyou for helping me get this far! Ill keep this post updated if the issue is resolved when I get the transistors in.

So Swapped q15, q24 and r101 fixed all issues I was having thankyou for the help.