Have you made any progress here?
Quoted from Sonora70:The voltages across U9 seem close EXCEPT pin 5. It should be 2.8v. Im only getting .017v ...
This might be a symptom of a locked CPU rather than cause of the problem. In any case measure the resistance between that pin 5 and ground (I get around 4.6M ohms with the black lead on the ground plane of my board). If you get a substantially lower resistance it could be shorted at input pin 8 of U19.
What voltages are you measuring on pins 3 and 37 of the CPU?
Clermont, FL
