“LED displays for Zaccaria, Bally/Stern, Williams/Data East and Zaccaria parts”

» Back to home

Biz information Shop home

Set of LED displays for Bally/Stern pinball machines Shop highlight

!New LED digit version!
New and complete LED display (amber/orange) ultra-bright for Bally / Stern pinball machines
(kit version to solder)

The display reproduces the original look of the original display thanks to the amber LEDs and is suitable for replacement of Bally/Stern 6 or 7 digits.
(Bally AS-2518-15 / Bally AS-2518-21 / Bally AS-2518-58 / Stern A-434 / Stern DA-100 / Stern DA-300 / Stern A-472 / Stern A-645 / ...)

This new and complete LED display replaces the old gas display and operates with 5 volts voltage already present in the pinball machine.
You don't have to replace all the displays since you can use both led and original displays at the same time.

We are happy to announce the arrival of the new LED digit shape.
The new digit shape matches the aspect of the original displays so close that it will be difficult to see the difference between the original and our LED display.
Old digits are no longer available.

You don't have to modify anything inside the pinball, the display is plug & play and can be installed on any Bally/Stern pinball which uses these models.

The new LED display has a brightness regulator in order to adapt the LEDs brightness to the old displays.
It is provided with angle brackets for a better rigidity of the LED module and a “light shield foam” in order to insulate the digits from the lamp light.
A jumper present on the board will give you the option to enable or disable the decimal dot.
It is not necessary to be an expert do assemble the display, just a good soldering machine and some passion.
A complete and detailed assembly guide is provided with the kit.

Let's have a resume of the advantages of this display:
- No more nasty 190v High Voltage
- Very low current usage, no worries for your 5v power regulator
- One display is compatible with all similar pinball machines using 6 or 7 digits
- You can easy enable or disable the dot for decimals
- Led displays are modular, you can swap the 6 digits module with a 7 digits module
- Easy to assemble, very basic knowledge is enough to do the job
- Better stability with the angle brackets provided with the kit
- Plug&Play - no modifications needed on your old pinball machine
- Front or rear brightness regulator
- Light shield foams

In order to keep the price as low as possible those displays are sold in DIY kits very easy to assemble and solder.

Linked to 82 games

Item photos

cover_ori (resized).jpg
DR2518_6D_ori_ (resized).jpg
DR2518_7D_ori_ (resized).jpg
DR2518_kit (resized).jpg
BallyPowerPlay (resized).jpg
RollingStones (resized).jpg
Centaur (resized).jpg
medusa_site (resized).jpg
elektra2 (resized).jpg
vector (resized).JPG

Order here!

Pick a variation

Set of 5x6 digits displays Out of stock
$ 150.00
Set of 5x6 digits displays (Original aspect LEDs) In stock
$ 165.00
Set of 4x7 digits + 1x6 digits displays Out of stock
$ 150.00
Set of 4x7 digits + 1x6 digits displays (Original aspect LED In stock
$ 165.00
Set of 4x7 digits + 2x6 digits displays Out of stock
$ 178.00
Set of 4x7 digits + 2x6 digits displays (Original aspect LED In stock
$ 195.00



This item has not been reviewed yet.


From $ 150.00

Price depends on selected item variation.

Ships for $ 15.00 (International $ 40.00)


Contact (via PinsideMail)


No reviews have been posted for this item.
Reviews can be written by anyone who has purchased this item.

Other items in this category

This page was printed from and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.