Got me a under the cabinet Flasher Kit from CoinTaker yesterday. Took me about 1 hr and 10 min's to install.. I could do the 2nd 1 now in half the time.. The Flasher strip's come in 3 Piece's with Link up cable's for each. They are pre-sized for the under-side ( Entire Cabinet length )... Poke a hole thru a vent in the Left back corner and feed the wire inside. Main wire has 4-wire's , The Black is for The Power or ( Hot ) .Red , Blue and green are the other wire's.. Tap into a Flasher of yr choice.. The Black is Only used Once.. The Remaining color wires are attached to the Flasher side of the socket.. Was Fairly simple to install and What a Light-show it Produce's.. This is my Sample Video , I will film another 2-nite w/ the p/f up show-n how the wire's are installed and a view from under the cab.. This Flashed mod Can be Used on Any Pin !!!!!!

Remember ,, Sample Video-

CoinTaker u- p/f Flasher link http://shop.cointaker.com/product.sc?productId=1037&categoryId=8

BSD_Light_mod_kit_012.JPG BSD_Light_mod_kit_008.JPG

Poll Added !!! Pin Choice Award's !!!

Not too Bad to install.. Color's are Red , Blue , Green and also White when they All Max out... The install Video will be tomorrow or Sat.. Tomorrow is my B-day , i guess i could do it dur-n the day.. Kid's are goin to my Parent's and kat is take-n me to a Steak House ..

Thank's PinBell ,,, The wife took me out for a Killer Tyme 2-nite.. I also bought me another Topper for my BSD ..

BSD_Topper.jpg BSD_Topper_-1.jpg

Took another video 2-nite. Had a few PM's ask-n about the install.. Here it is !!!

..

Chris said that the 10% Discount Can be used for the Flasher kit... I'm think-n about gett-n CoinTaker's Lighted Plunger Kit to install on TZ next.. Why not , look's Good !!!

.http://shop.cointaker.com/product.sc?productId=851&categoryId=77