Wow, that is one beautiful all original BSD!

Speaking of BSD, I have this DMD which based off the tag was in prototype #1 of game model 50001 which according to PinWiki is BSD but looking at Ivan’s game, it has the newer tag style so maybe Williams changed before BSD went into production or PinWiki is wrong? In any case this was in my test fixture which came Williams so I know it is legit. DMD no longer fires up so just pulled it and put a new one in but it’s a piece of WMS history if anyone is interested!!!

IMG_6144 (resized).jpeg

IMG_6145 (resized).jpeg

Have a nice Banzai Run I could bring. $8800

IMG_0325 (resized).jpegIMG_0326 (resized).jpegIMG_0327 (resized).jpegIMG_0328 (resized).jpegIMG_0329 (resized).jpegIMG_0330 (resized).jpeg

Priced well below Pinside average.

NOS Wade Krause Playfields, Sky Jump and 2001 in mint condition $950 each
PBR Gottlieb coin doors C-4537A, with the correct Nickel Plating like a mirror $120 each (when the plating was good)
PBR Gottlieb coin door trim single Shute C-5954A $25
PBR Gottlieb coin door trim double Shute C-4529A $35 (no longer available from PBR.
PBR Gottlieb coin entry plates C-10719A, new 40 used 25
Gottlieb flipper button cabinet guards, A-3927 $15 per set
Gottlieb lock down bar end caps 1960 to 1966 era. $40 per set
Legs 28 1/2 chrome ribbed new set $60

IMG_0001 (resized).JPG

IMG_0002 (resized).JPG

IMG_0003 (resized).JPG

IMG_0004 (resized).JPG

I think Ibuypinballs had a LH listed maybe 10 pages ago

He did,it's sold.

Some odd end stuff that can be brought to Allentown, here's the list with prices (see pics below):

-5 Bill stackers (4 tested and working, 1 not working) 4 are Pyramid (120v) and 1 Mars Series 2000 (115v), with 9 pin connector. Take all 5 for $450 or $125 each for the working ones and $30 for the broken one (good for parts or if you just need the stacker).

-Twilight Zone clear main ramp, with stickers: $100

-Addams Family ramp and topper stickers (missing topper sticker with "Addams Family" logo): $30

-Nintendo PCB shield with board and harness (Untested, this was from either a Donkey Kong or Mario Bros.): $25

PXL_20240425_211319996 (resized).jpg

PXL_20240425_211332523 (resized).jpg

PXL_20240425_213820679 (resized).jpg

PXL_20240425_211212354 (resized).jpg

PXL_20240425_211242291 (resized).jpg

PXL_20240425_211910769.MP (resized).jpg

PXL_20240425_211920992.MP (resized).jpg

GOT IT THANKS

WTB: Gottlieb, Bally and Williams chime boxes.

Eagle video game made by centuri, cabaret style cabinet. Doesnt work. Will need new Monitor and chasis. Comes with untested boards, manual and schematic. Also needs a backdoor. $400.

20240426_182410 (resized).jpg

20240426_182607 (resized).jpg

Dropping prices on unsold items

Classic Stern lockdown bar with receiver; came out of a Lightning that I parted out years ago so if you are doing a scratch build, you might need this!

IMG_6151 (resized).jpeg

IMG_6152 (resized).jpeg

IMG_6153 (resized).jpeg

This one I can’t recall what it came out of but it’s super clean and has a great finish to it on top! And with that, this is the last of my lockdown bars!!!

IMG_6154 (resized).jpeg

IMG_6155 (resized).jpeg

IMG_6156 (resized).jpeg

Advertised and possibly headed to a possible conversion to a coffee table, this pinball was purchased and fully restored to its full glory! Up for sale and your consideration, is this 1981 Gottlieb Volcano pinball machine. As Gottlieb designed and offered unique layouts and gameplay, this fast action table was given a skee ball ramp. Loaded with brand new components, this includes:

* New inner and outer back-glasses (courtesy of BGresto)
* Full set of new plastics (NO cracks, breaks, or chips)
* New drop targets
* X-Pin System 80 power supply

Artwork was touched up and repaired, then the entire playfield, including the skee ball ramp, was clear coated with automotive clear coat >>> looks stunning. Cabinet is solid / good condition and clean, with some dings and scratches — typical of this vintage and age. The machine was gone through, top to bottom, including but not limited to the following work listed below:

* NVRam installed on MPU (no more need for batteries).
* All single pin connectors were repinned, including all pop bumper board plugs
* All edge connectors were burnished and cleaned
* BULLETPROOFING MEASURES
— Orange filter capacitor changed
— Additional wires (+5 Volt / ground)
added to interconnect harness
— Ground wires added to solid
state boards
— Separate main ground wire
connected directly to ground plane

* GOTTLIEB SERVICE BULLETINS
— Switch arcing modification (for
kicking rubbers and kicking targets)
— Pop bumper driver board rework
update
— Additional wire added to interconnect
harness (to strengthen ground
connection)

* Scoring displays rejuvenated
* Fire LED’s installed for the FIRE PIT
* LED bulbs replaced all incandescent bulbs
* Brand new rubber rings
* Polycarbonate / LEXAN washers installed to protect slingshot and drop target plastics
* All switches adjusted and checked
* All contacts (brass / tungsten) cleaned
* Coil sleeves replaced
* Playfield cleaned, waxed, and ready for play.

Only selling this game because I simply out of room. This pinball is ready for action. VOLCANO pinball manual and schematics is included. Please PM me with any questions, or if you're interested. Thank you.

$2,100

IMG_1049 (resized).jpeg

IMG_1053 (resized).jpeg

IMG_1050 (resized).jpeg

IMG_1051 (resized).jpeg

IMG_1052 (resized).jpeg

IMG_1054 (resized).jpeg

IMG_1055 (resized).jpeg

IMG_1058 (resized).jpeg

IMG_1059 (resized).jpeg

IMG_1060 (resized).jpeg

Looking for a nice Gottlieb Black Hole apron and a shooter gauge.

**SOLD**Any one want my box of random arcade, pin, and slot parts?

https://www.facebook.com/share/cSNrGoXwXAxBA6vt/?mibextid=79PoIi

Pm coming

Looking for any World Cup Soccer plastics or ramps! Thank you

We have a brand new EXTREMELY hard find Metallica Sparky.
Autographed by the games designer
This is the full assembly, not just the chair.
100% brand new in mint condition.
$1000

71010959456__EDA54D7E-BADC-45D4-8CA5-5971BAE2CA43 (resized).jpeg

71010960770__47BFF748-A511-4347-9740-4B9A64D05CD0 (resized).jpeg

71010962951__A871010A-D00A-4B02-BF17-70DB9A33584F (resized).jpeg

looking for a minty Bally Apron for Star Trek

I know this may be a tad bit of a long shot...asking for a family member....anyone selling anything with multiball in the 2k - 2.5k range? (Working, not a project game)

I have seen a few on here for 3k and up from there lowest I have seen unless u want something older

I have a 4 player nba jam TE its in gauntlet cab

Get an early 60s EM, always multiball

Haha...valid

Might get two of them

I have two flipper rebuild kits (4 flippers total) for Williams 1969-1979
marco #WFLKIT6979

$54.99 new for two flippers on marco
asking
$30 for two flippers

flipper kit (resized).png

SOLD

Pm sent

Looking for a basket case 81 version EBD. I'm really only concerned that the wiring isn't hacked up too bad.

Williams Black night spinner NOS! Better then a stiker! 50$

IMG_6040 (resized).jpeg

IMG_6041 (resized).jpeg

I need to build a BK to incorporate that NOS spinner.

Trading for the following pins, Ghostbusters Prem, Twilight Zone, MMadness. Whodunnit, Cactus Canyon, Indiana Jones, Attack from Mars, Monster Bash, AC/DC Prem, T3 Chrome Edition, Safe Cracker, Frankenstein, Frankenstein, No fear, Highspeed, Flash, BK, BK2000, Dialed In, Spiderman, Star Trek (Prem), 24, Rollergames, Firepower, F-14, Superman, BS Dracula, Big Lebowski. Not an exhaustive list open to different pins.

These are the pins I can bring to Pinfest from Richmond. Willing to trade or open to cash offers. Will be there Thursday to Sunday.

SOLD!

Machine - For Sale

Loaded Godzilla (Prem) Pinfest Allentown, PA Featured Archived

Fully restored (full original status) - “Godzilla Premium (Over 3k in mods very nice Speaker Lights, Upgraded UFO, Many buildings and Bridge upgraded, Building by Diddy Mods, Oxygen Expander, Maser Cannon (Not Pictured) G...”

2024-04-21

Allentown, PA

121g1gw

10,000 (OBO)

Archived after: 12 days

Viewed: 521 times

Status: Sold (amount private)

Contributed to Pinside

Got positive feedback

Machine - For Sale

For sale/trade: Avengers: Infinity Quest(pro) Amazing Shape

HUO - Undocumented (Home Used Only) - “Open to trades, I have a few pins listed as well. Nice condition Avengers Infinity Quest Pro. Manufactured December 2020. Has a few mods: Avengers Custom Video scenes (Can be s...”

13 days ago

Richmond, VA

121g1gw

5,750 (OBO)

Machine - For Sale

Hook Pinfest Allentown or Richmond,Va Archived

HUO - Undocumented (Home Used Only) - “3rd owner Huo Hook. I added Leds, pinball playfield protector, Titan competition bands and new stern flipper mechanics. Playfield is immaculate, all original boards, translite in ...”

2024-04-27

Allentown, PA

121g1gw

3,700 (OBO)

Archived after: 6 days

Viewed: 237 times

Status: Not sold: Decided to keep game

Machine - For Sale

World Poker Tour Allentown,PA Pinfest or Richmond Archived

Fully restored (full original status) - “Bringing with me to Allentown, PA Pinfest for Trade or Sale. Trades for Whodunnit, a Nice Fish tales or similar Bally/Williams games. Check my other games for sale or trade. ...”

2024-04-21

Richmond, VA

121g1gw

3,750 (OBO)

Archived after: 11 days

Viewed: 234 times

Status: Not sold: Decided to keep game

Looking for side rail for wpc. Williams/bally Any color Thank you.

I've got a set, used but not dented $25

Looking for a nice condition STNG apron

Dropping some prices:
$150 for the big Pepsi Letterboard and $100 for the playfield. Still $50 for the backglass.

Still looking to purchase 2 Flash Gordon spinners.

Edit: Playfield is now sold.

Just listed a sweet bone stock Stranger Things (Pro) with 390 plays or so. Looking to sell at the show or trade for something of similar value.

https://pinside.com/pinball/market/classifieds/ad/176119

1973 Gottlieb Hot Shot/Big Shot/Pro Pool NOS plastic set.
Only 6 of the 7 piece set - missing one of the small yellow/black pieces - SOLD
(repro set online is 174.99)

20240418_153617 (resized).jpg20240425_151823 (resized).jpg

Rob_E PM sent about the Hot Shot plastics.

Any interest in some woodrail pin projects? All are complete with legs (no leg bolts). Some backglass flaking. Here's the list:

1948 Williams Dew-Wa-Ditty
1947 Chicago Coin Gold Ball
1949 Chicago Coin Grand Award
1947 Bally Ballyhoo
1947 Genco State Fair

$500 ea, $100 deposit for me to bring to Pinfest (Venmo or Paypal)

PM me for pics or more details

I am looking for this particular classic Stern coin entry plate. It has one left and one right entrance with no center slot. Please let me know if you can help. Thanks.

Trident (resized).jpg

Also still hoping for a Williams Gulfstream backglass in any reasonable condition.

Gulfstream (resized).jpg

Looking for a player condition Black Knight. No hard-tops or overlay, working or not working. Will be there 5/3.. Thanks!

Have you called Shay? They can bring it to the show for you if they have it.

Shay hasn't done that title.

Super nice clean Twilight zone with Electric Playground Topper listed on marketplace.

The power eye is moving!, the interactive door flashes, the pinball rolls on the habitrail track when the gumball machine loads. Clock dial turns. This game is super fun! Here's the maintenance list: Electric Playground Topper! Full shop out with new rubbers, balls (including power ball) ColorDMD LED display NVRAM installed- no more batteries to worry about New ribbon cables between all boards +5vdc bullet proofed for perfect power! (new LM323K adjustable regulator installed) Brand new clock (blue) Cliffy scoop protector Twilight Zone - Mini Playfield switch kit upgrade installed! New legs and leg levelers Back box illuminated light changing door Kit installed Gum Ball Mod This game is ready to be played. Fight the Power.. Get to the Twilight zone.. Don't fall behind... The new dimension is waiting for you! Link to Electric Playground topper installed on this game!

TRADE: Looking for Bally AFM in nice condition.

The Electric Playground proudly presents the TZ Topper

PM for video of game to have a better representation

That is a real cool topper!

Did you check with them directly? I have 2 back glasses that they have no mention of on the site that they do.

If anyone in the rochester ny area needs stuff brought down to pinfest I will have a trailer. Pm me for details/pricing

If anyone if thinking about getting my Elvira Video Screen mod that plays the movie trailers, I'm doing a pinfest Allentown special.

Orders between now and Allentown show will also include the back door skill shot sign mod with the apron mod. I will also be at Allentown show so you can pick it there to avoid the shipping cost.

https://pinside.com/pinball/shops/shop/1120-docquest-pinball-mods/04964-elvira-house-of-horrors-apron-video-display-mod

https://pinside.com/pinball/shops/shop/1120-docquest-pinball-mods/05012-elvira-super-secret-back-door-neon-sign-mod

I can also bring some of my Batman66 premium batsignal ceiling projectors if anyone is looking for one of those.

https://pinside.com/pinball/shops/shop/1120-docquest-pinball-mods/01442-bat-signal-projector-for-premium