A pinball controller for DIY use with Mission Pinball Framework and based on the Open Pinball Project. Use it to build your own original game or overhaul your existing game with new lights and rules!

It started as a Kickstarter project here: https://www.kickstarter.com/projects/ ########## [phone number removed]/cobrapin-pinball-controller

- 24 coil drivers for solenoids, flashers, motors, etc. Outputs are broken out into 3 banks of 8 outputs.
- 38 direct switch inputs <OR> 22 direct inputs and an 8x8 switch matrix
- Neopixel support for 512 RGB or RGBW LEDs
- 24-50V power filter. Board also provides the common ground for the supplies.
- Fuses for solenoid banks and Neopixels
- Relay Control Output for common dual relay boards
- Easy replacement of at-risk components

Version 2.01 adds the following:
- Bidirectional input pin protection
- Support for up to 8 RC servos
- Support for SPI LEDs like SK9822
- Now possible to drive 12V LEDs
- Dual control output for dual relay boards
- 2 cable tie mounting points for USB cable management

Mating connectors/crimps are included.

Further descriptions and details on Pinball Makers: http://pinballmakers.com/wiki/index.php?title=CobraPin

Spare/replacement processor boards can be found here: https://pinside.com/pinball/market/shops/1254-cobra-amusements/07422-cobrapin-processor-board
Spare/replacement transistors can be found here: https://pinside.com/pinball/market/shops/1254-cobra-amusements/08456-cobrapin-spare-transistors-fets