Lots of stuff done to it to bring it up to a nice machine:

New drop targets all around
New pop bumper caps, pops function strong and 100% but one of the pop bumper bodies is cracked
Alltek MPU
Siegecraft LED boards (no flicker LEDs)
Lamp board worked through with bad SCRs replaced, header pins reflowed, Bad lamp sockets replaced, ALL lamps work!
Comet 2SMD LEDs throughout in warm white
Cleaned and resleeved all mechs
Rebuilt all 4 flippers
New Pinitech LED displays (low voltage)
New rectifier board
Titan flipper rubbers, rubber rings are still good throughout
New legs and levelers
All new flipper bats
New flipper buttons and switches
New glass
Probably some other things that I'm forgetting

Has typical cabinet fade, but no gouges or missing chunks of wood
Backglass has 2 small nicks in the art, completely presentable and hardly noticeable
Plastics are all there and very nice (I replaced a cracked one, that i would include)
100% plug and play

Has some wear on the playfield, but presents well. Has typical cupping inserts. One issue that I've been meaning to look at is that the first drop target can be a bit finicky, in that it might stick up too far and not drop, or that it might drop with playfield vibrations. I haven't looked into it much.

I am asking for $1900 obo for it.

More pics here:
https://photos.app.goo.gl/X4B645puxum165cD9