Tales of the Arabian Nights
Williams, 1996You're currently viewing posts by Pinsider Hawk007.
Click here to go back to viewing the entire thread.
The pin 8 , 62 volts is reading funny for sure.And pins 1 and 2 are way high. Should be 12 volts between 1 and 2 and should be around 40 volts lower. Looks like time to rebuild the high voltage section.
Make sure you are using a quality meter and are on DC voltage and well connected to ground.
Cheers
Its always best to rebuild the entire section when the HV goes bad. Its only a few dollars to replace everything in the HV section and get a 'new' board good to go for many years.
The components have a hard life. Throw Rottendog an email before you begin though. They may have a kit for you. If it was a factory board set go to Ed at great plains for HV kits.
You're currently viewing posts by Pinsider Hawk007.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/totan-dmd-issues?tu=Hawk007 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Seward, AK