Photo: pinballphotos
  1. » Forum
  2. » Manufacturers
  3. » Homebrew pinball
  4. » Pinball Amigos : New Super Mario Bros
(Topic ID: 335083)

Pinball Amigos : New Super Mario Bros

By mic1977

1 year ago


Topic Heartbeat

Topic Stats

  • 704 posts
  • 73 Pinsiders participating
  • Latest reply 12 days ago by mic1977
  • Topic is favorited by 120 Pinsiders

You

Linked Games

No games have been linked to this topic.

    Topic Gallery

    View topic image gallery

    IMG-20240412-WA0034 (resized).jpeg
    IMG-20240414-WA0006 (resized).jpg
    IMG-20240414-WA0004 (resized).jpg
    IMG-20240414-WA0005 (resized).jpg
    IMG-20240412-WA0025 (resized).jpg
    IMG-20240412-WA0009 (resized).jpg
    IMG-20240412-WA0003 (resized).jpg
    IMG-20240412-WA0010 (resized).jpg
    IMG-20240412-WA0012 (resized).jpg
    IMG-20240412-WA0007 (resized).jpg
    IMG-20240412-WA0002 (resized).jpg
    IMG-20240412-WA0017 (resized).jpg
    IMG-20240412-WA0013 (resized).jpg
    IMG-20240412-WA0015 (resized).jpg
    IMG_20240412_203533 (resized).jpg
    IMG-20240412-WA0029 (resized).jpg
    1 ... 1112131415
    There are 704 posts in this topic. You are on page 14 of 15.
    0
    5
    5
    #651 47 days ago
     
    SMC

    smoothbore19

    Pinside member

    6y 48,550 796

    Amigos updates are the best parts of the weekend.

    0
    12
    12
    #652 41 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Today Bas is installing the bal save mech

    IMG-20240315-WA0000 (resized).jpgIMG-20240315-WA0000 (resized).jpgIMG-20240315-WA0009 (resized).jpgIMG-20240315-WA0009 (resized).jpg
    0
    15
    15
    #653 41 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    And it work perfect

    0
    10
    10
    #654 41 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    I go design a mech from medival madness the trol mech and Dick is measuring the mech so i can take that to the laptop

    IMG-20240315-WA0001 (resized).jpgIMG-20240315-WA0001 (resized).jpgIMG-20240315-WA0002 (resized).jpgIMG-20240315-WA0002 (resized).jpgIMG-20240315-WA0003 (resized).jpgIMG-20240315-WA0003 (resized).jpgIMG-20240315-WA0012 (resized).jpgIMG-20240315-WA0012 (resized).jpgIMG-20240315-WA0013 (resized).jpgIMG-20240315-WA0013 (resized).jpgIMG-20240315-WA0014 (resized).jpgIMG-20240315-WA0014 (resized).jpg
    0
    10
    10
    #655 41 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    IMG-20240315-WA0004 (resized).jpgIMG-20240315-WA0004 (resized).jpgIMG-20240315-WA0005 (resized).jpgIMG-20240315-WA0005 (resized).jpgIMG-20240315-WA0006 (resized).jpgIMG-20240315-WA0006 (resized).jpgIMG-20240315-WA0007 (resized).jpgIMG-20240315-WA0007 (resized).jpgIMG-20240315-WA0008 (resized).jpgIMG-20240315-WA0008 (resized).jpgIMG_20240315_213933 (resized).jpgIMG_20240315_213933 (resized).jpg
    0
    13
    13
    #656 41 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Lets print the mech

    IMG-20240316-WA0000 (resized).jpgIMG-20240316-WA0000 (resized).jpgIMG_20240316_110910 (resized).jpgIMG_20240316_110910 (resized).jpg
    0
    3
    3
    #657 39 days ago
     
    III

    TreyBo69

    Pinside member

    5y 136K 8,476

    OP
    Quoted from mic1977:

    Today Bas is installing the bal save mech
    [quoted image][quoted image]

    I like how he rather stand on a stool with a leg out on the wall for support instead of moving the stuff out of the way.

    0
    1
    1
    #658 39 days ago
     
    LEE

    leeoneil

    Pinside member

    FR Clermont-ferrand

    2y 46,300 386 1

    Nice work these lasts days !

    OP
    Quoted from mic1977:

    Today Bas is installing the bal save mech

    Can you share a reference of what you used please ?
    I'm trying to find something that can be held without heating, like double-coil flipper.
    It seems you have found something similar !

    0
    4
    4
    #659 37 days ago
     
    GAZ

    Mooseman

    Pinside member

    7y 25,800 36

    Beard. U.K. pinballers on tour are currently in Rotterdam. Were booked into the pinball museum this Saturday 23/3/24
    There’s about 20 of us Inc big Phil from pinside. Ad Jonka is coming along too. If the pinball Amigos are free let’s get together

    0
    1
    1
    #660 36 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Quoted from Mooseman:

    Beard. U.K. pinballers on tour are currently in Rotterdam. Were booked into the pinball museum this Saturday 23/3/24
    There’s about 20 of us Inc big Phil from pinside. Ad Jonka is coming along too. If the pinball Amigos are free let’s get together

    How late are you in the museum

    0
    2
    2
    #661 36 days ago
     
    GAZ

    Mooseman

    Pinside member

    7y 25,800 36

    We have full day tickets and are getting there from 12 noon when it opens. Quite probably there all day mate

    0
    2
    2
    #662 36 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Quoted from Mooseman:

    We have full day tickets and are getting there from 12 noon when it opens. Quite probably there all day mate

    We will be there around 14:00 hour see you there

    0
    6
    6
    #663 35 days ago
     
    PRS

    pinballrockstar

    Pinside member

    NL Rotterdam

    9y 117K 13,648 11

    Quoted from leeoneil:

    Can you share a reference of what you used

    It is a 2 coil setup from some Williams machine,dunno which one,bought it on ebay from a dude.

    IMG_4833 (resized).jpegIMG_4833 (resized).jpeg
    0
    3
    3
    #664 35 days ago
     
    BDC

    MrBigg

    Pinside member

    US Munford, AL

    1y 61,300 993 8

    Quoted from leeoneil:

    Nice work these lasts days !

    Can you share a reference of what you used please ?
    I'm trying to find something that can be held without heating, like double-coil flipper.
    It seems you have found something similar !

    It's basically a smart drop using a button instead of a drop target head. Same setup, only a different plastic piece.

    0
    4
    4
    #665 35 days ago
     
    LEE

    leeoneil

    Pinside member

    FR Clermont-ferrand

    2y 46,300 386 1

    Thank you pinballrockstar and MrBigg , i'll try to find something similar !

    0
    3
    3
    #666 34 days ago
     
    BDC

    MrBigg

    Pinside member

    US Munford, AL

    1y 61,300 993 8

    Quoted from leeoneil:

    Thank you pinballrockstar and MrBigg , i'll try to find something similar !

    You can literally buy the stern hidden post kit, and put the pop up cap on it for the same mech. Both available at PBL

    0
    8
    8
    #667 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Today Bas is working on the code for the ball save

    IMG_20240323_000445 (resized).jpgIMG_20240323_000445 (resized).jpg
    0
    9
    9
    #668 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    And it looks great

    0
    11
    11
    #669 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    We have to take the mech out medevil madness to mausering the mech for the laptop

    IMG-20240323-WA0000 (resized).jpgIMG-20240323-WA0000 (resized).jpgIMG-20240323-WA0001 (resized).jpgIMG-20240323-WA0001 (resized).jpgIMG-20240323-WA0008 (resized).jpgIMG-20240323-WA0008 (resized).jpgIMG-20240323-WA0009 (resized).jpgIMG-20240323-WA0009 (resized).jpgIMG-20240323-WA0005 (resized).jpgIMG-20240323-WA0005 (resized).jpg
    0
    6
    6
    #670 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    IMG_20240322_231413 (resized).jpgIMG_20240322_231413 (resized).jpgIMG_20240322_231430 (resized).jpgIMG_20240322_231430 (resized).jpgIMG_20240322_231442 (resized).jpgIMG_20240322_231442 (resized).jpg
    0
    14
    14
    #671 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    And i made my own beard design logo

    IMG-20240323-WA0007 (resized).jpgIMG-20240323-WA0007 (resized).jpgIMG-20240323-WA0003 (resized).jpgIMG-20240323-WA0003 (resized).jpgIMG-20240323-WA0004 (resized).jpgIMG-20240323-WA0004 (resized).jpgIMG-20240323-WA0006 (resized).jpgIMG-20240323-WA0006 (resized).jpg
    0
    15
    15
    #672 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Saturday we went out to the ducht pinball museum with some UK pinfest amigos

    IMG-20240323-WA0011 (resized).jpgIMG-20240323-WA0011 (resized).jpgIMG-20240323-WA0013 (resized).jpgIMG-20240323-WA0013 (resized).jpg
    0
    6
    6
    #673 34 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    The printer is running and make the next piece of the mech

    IMG_20240323_000458 (resized).jpgIMG_20240323_000458 (resized).jpgIMG_20240323_000511 (resized).jpgIMG_20240323_000511 (resized).jpg
    1 week later
    0
    9
    9
    #674 27 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Today we work on the mech almost all parts are printed. And Bas have make a steel tod for the coil

    IMG-20240330-WA0037 (resized).jpgIMG-20240330-WA0037 (resized).jpgIMG-20240330-WA0036 (resized).jpgIMG-20240330-WA0036 (resized).jpgIMG-20240330-WA0035 (resized).jpgIMG-20240330-WA0035 (resized).jpgIMG-20240330-WA0034 (resized).jpgIMG-20240330-WA0034 (resized).jpgIMG-20240330-WA0031 (resized).jpgIMG-20240330-WA0031 (resized).jpgIMG-20240330-WA0032 (resized).jpgIMG-20240330-WA0032 (resized).jpgIMG-20240330-WA0013 (resized).jpgIMG-20240330-WA0013 (resized).jpgIMG-20240330-WA0033 (resized).jpgIMG-20240330-WA0033 (resized).jpgIMG-20240330-WA0015 (resized).jpgIMG-20240330-WA0015 (resized).jpgIMG-20240330-WA0019 (resized).jpgIMG-20240330-WA0019 (resized).jpgIMG-20240330-WA0014 (resized).jpgIMG-20240330-WA0014 (resized).jpgIMG-20240330-WA0020 (resized).jpgIMG-20240330-WA0020 (resized).jpgIMG-20240330-WA0012 (resized).jpgIMG-20240330-WA0012 (resized).jpg

    0
    11
    11
    #675 27 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    IMG_20240329_213028 (resized).jpgIMG_20240329_213028 (resized).jpgIMG_20240329_213146 (resized).jpgIMG_20240329_213146 (resized).jpgIMG_20240329_213140 (resized).jpgIMG_20240329_213140 (resized).jpgIMG_20240329_213155 (resized).jpgIMG_20240329_213155 (resized).jpgIMG_20240329_220402 (resized).jpgIMG_20240329_220402 (resized).jpgIMG_20240329_220401 (resized).jpgIMG_20240329_220401 (resized).jpgIMG_20240329_213204 (resized).jpgIMG_20240329_213204 (resized).jpgIMG_20240329_213211 (resized).jpgIMG_20240329_213211 (resized).jpgIMG_20240329_213216 (resized).jpgIMG_20240329_213216 (resized).jpgIMG_20240329_223026 (resized).jpgIMG_20240329_223026 (resized).jpgIMG_20240329_223031 (resized).jpgIMG_20240329_223031 (resized).jpg
    0
    10
    10
    #676 27 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    The assemble was good but not working good the rod is not good the real one is make of two materieel one magnetic and one non magnetic

    IMG-20240330-WA0023 (resized).jpgIMG-20240330-WA0023 (resized).jpgIMG-20240330-WA0024 (resized).jpgIMG-20240330-WA0024 (resized).jpg
    0
    12
    12
    #677 27 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    OP
    Quoted from mic1977:

    [quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

    More pictures of the assemble

    IMG-20240330-WA0022 (resized).jpgIMG-20240330-WA0022 (resized).jpgIMG-20240330-WA0025 (resized).jpgIMG-20240330-WA0025 (resized).jpgIMG-20240330-WA0026 (resized).jpgIMG-20240330-WA0026 (resized).jpgIMG-20240330-WA0029 (resized).jpgIMG-20240330-WA0029 (resized).jpg
    0
    2
    2
    #678 25 days ago
     
    LEE

    leeoneil

    Pinside member

    FR Clermont-ferrand

    2y 46,300 386 1

    So will you make a new version, with two parts welded together ?
    How is it possible for metal to be "not magnetic" ????

    0
    3
    3
    #679 23 days ago
     
    BDC

    MrBigg

    Pinside member

    US Munford, AL

    1y 61,300 993 8

    Quoted from leeoneil:

    So will you make a new version, with two parts welded together ?
    How is it possible for metal to be "not magnetic" ????

    Stainless steel is non ferrous, therefore non magnetic.

    Bi Metals are also low ferrous depending on the chemistry, so it would be poorly magnet if at all as well.

    0
    9
    9
    #680 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Today we try the mechanic we made Bas wil fit it on the flippermech to test it

    IMG_20240405_213403 (resized).jpgIMG_20240405_213403 (resized).jpgIMG_20240405_213409 (resized).jpgIMG_20240405_213409 (resized).jpgIMG-20240406-WA0017 (resized).jpgIMG-20240406-WA0017 (resized).jpgIMG-20240406-WA0016 (resized).jpgIMG-20240406-WA0016 (resized).jpg
    0
    8
    8
    #681 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    I work on the swichts for bowers head

    IMG-20240406-WA0024 (resized).jpgIMG-20240406-WA0024 (resized).jpgIMG-20240406-WA0021 (resized).jpgIMG-20240406-WA0021 (resized).jpgIMG-20240406-WA0020 (resized).jpgIMG-20240406-WA0020 (resized).jpgIMG-20240406-WA0014 (resized).jpgIMG-20240406-WA0014 (resized).jpgIMG-20240406-WA0013 (resized).jpgIMG-20240406-WA0013 (resized).jpg

    IMG-20240406-WA0023 (resized).jpgIMG-20240406-WA0023 (resized).jpgIMG-20240406-WA0022 (resized).jpgIMG-20240406-WA0022 (resized).jpg
    0
    7
    7
    #682 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    0
    7
    7
    #683 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    I grind the swichts to fit the mechanic

    0
    9
    9
    #684 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Bas is making a hole in the playfueld wen he is drinking martini

    IMG_20240405_235859 (resized).jpgIMG_20240405_235859 (resized).jpgIMG_20240405_235915 (resized).jpgIMG_20240405_235915 (resized).jpgIMG_20240405_235943 (resized).jpgIMG_20240405_235943 (resized).jpgIMG_20240406_011249 (resized).jpgIMG_20240406_011249 (resized).jpgIMG_20240406_011142 (resized).jpgIMG_20240406_011142 (resized).jpgIMG_20240406_011701 (resized).jpgIMG_20240406_011701 (resized).jpg
    0
    8
    8
    #685 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Now i go to paint bowser

    IMG-20240406-WA0004 (resized).jpgIMG-20240406-WA0004 (resized).jpgIMG-20240406-WA0002 (resized).jpgIMG-20240406-WA0002 (resized).jpgIMG-20240406-WA0003 (resized).jpgIMG-20240406-WA0003 (resized).jpgIMG_20240405_234244 (resized).jpgIMG_20240405_234244 (resized).jpgIMG-20240406-WA0041 (resized).jpgIMG-20240406-WA0041 (resized).jpgIMG-20240406-WA0032 (resized).jpgIMG-20240406-WA0032 (resized).jpg
    0
    7
    7
    #686 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Now we need to print the mechanic all over because the swichts is on the wrong side to install

    0
    5
    5
    #687 20 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    See you next week

    0
    4
    4
    #688 20 days ago
     
    III

    TreyBo69

    Pinside member

    5y 136K 8,476

    OP
    Quoted from mic1977:

    Bas is making a hole in the playfueld wen he is drinking martini
    [quoted image][quoted image][quoted image][quoted image][quoted image][quoted image]

    Power tools and alcohol: an iconic duo for the intrepid homebrewer

    0
    2
    2
    #689 19 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    De

    OP
    Quoted from mic1977:

    I work on the switchs for bowers head
    [quoted image][quoted image][quoted image][quoted image][quoted image]
    [quoted image][quoted image]

    0
    13
    13
    #690 19 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    0
    3
    3
    #691 19 days ago
     
    ROB

    transprtr4u

    Pinside+ Frequent

    CA Edmonton, AB

    10y 130K 8,412 3

    Looks great ....

    1 week later
    0
    9
    9
    #692 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Today we go to install the new printed mech

    With the new beard design logo

    IMG-20240408-WA0001 (resized).jpgIMG-20240408-WA0001 (resized).jpgIMG-20240408-WA0002 (resized).jpgIMG-20240408-WA0002 (resized).jpg
    0
    6
    6
    #693 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Dick is instal it to the machine and Bas is soldering the wires

    IMG-20240412-WA0028 (resized).jpgIMG-20240412-WA0028 (resized).jpgIMG-20240412-WA0027 (resized).jpgIMG-20240412-WA0027 (resized).jpgIMG-20240412-WA0023 (resized).jpgIMG-20240412-WA0023 (resized).jpg
    0
    8
    8
    #694 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    I like the design of the mech

    IMG-20240412-WA0022 (resized).jpgIMG-20240412-WA0022 (resized).jpgIMG-20240412-WA0029 (resized).jpgIMG-20240412-WA0029 (resized).jpg
    0
    8
    8
    #695 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Lets do a alley meeting

    IMG_20240412_203533 (resized).jpgIMG_20240412_203533 (resized).jpg
    0
    6
    6
    #696 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Now i try to make a little plate for the hole in the playfield

    IMG-20240412-WA0017 (resized).jpgIMG-20240412-WA0017 (resized).jpgIMG-20240412-WA0013 (resized).jpgIMG-20240412-WA0013 (resized).jpgIMG-20240412-WA0015 (resized).jpgIMG-20240412-WA0015 (resized).jpg
    0
    7
    7
    #697 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    Bas is doing the code for the mech

    IMG-20240412-WA0002 (resized).jpgIMG-20240412-WA0002 (resized).jpg
    0
    5
    5
    #698 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    I use the old mech to fit the plate and springs

    We also need to grind the bolt heads smaller

    IMG-20240412-WA0007 (resized).jpgIMG-20240412-WA0007 (resized).jpgIMG-20240412-WA0012 (resized).jpgIMG-20240412-WA0012 (resized).jpgIMG-20240412-WA0010 (resized).jpgIMG-20240412-WA0010 (resized).jpgIMG-20240412-WA0003 (resized).jpgIMG-20240412-WA0003 (resized).jpgIMG-20240412-WA0009 (resized).jpgIMG-20240412-WA0009 (resized).jpg
    0
    15
    15
    #699 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    I also make a new shirt for the amigos wen we go to UK Pinfest

    IMG-20240412-WA0025 (resized).jpgIMG-20240412-WA0025 (resized).jpg
    0
    4
    4
    #700 12 days ago
    OP
     
    ???

    mic1977

    Pinside member

    NL Rotterdam

    7y 57,300 457 1

    This is how it looks like on the prototype. Next week we instal it on the mech in the machine.

    IMG-20240414-WA0006 (resized).jpgIMG-20240414-WA0006 (resized).jpgIMG-20240414-WA0005 (resized).jpgIMG-20240414-WA0005 (resized).jpgIMG-20240414-WA0004 (resized).jpgIMG-20240414-WA0004 (resized).jpg
    1 ... 1112131415
    There are 704 posts in this topic. You are on page 14 of 15.

    Reply

    Wanna join the discussion? Please sign in to reply to this topic.

    Hey there! Welcome to Pinside!

    Donate to Pinside

    Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

    This page was printed from https://pinside.com/pinball/forum/topic/third-time-lucky/page/14 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

    Scan the QR code on the left to jump to the URL this document was printed from.