tournament_button.jpgThere has been a lot of discussion on this. I figured I'd post a picture which I hope will help some out.
There is another guide online for the older style that can be found here
http://www.bingovit.be/en/technical-corner
In my pictures I do not have a clear picture of the diode that needs to be soldered on. If someone else has a diagram of the switch they could add that may also be helpful
Post edited by moderator: Please don't use all caps in thread headers.
Strange update. X-Men LE does NOT require a LED in the tourney button to work. I'm not sure what would have been changed, but after wiring up the button and expecting to have to put an LED in it....it lit fine with the included incandescent bulb.
Quoted from Jeff_PHX_AZ:I just got an #86 bulb today from cointaker, took the incadescent bulb out and it says C555 on the incadescrnt. So will I need a 555 wedge LED?
Yes, if it is going in a new LE or Premium it needs an LED.
http://pinside.com/pinball/forum/topic/are-the-newer-sterns-all-wired-for-tournament-play
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/pictures-of-stern-new-tournament-button-wiring and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Grove City, OH
