Cyclone
Williams, 1988You're currently viewing posts by Pinsider robdutch.
Click here to go back to viewing the entire thread.
One of 4 displays on our Cyclone is not working.
I measured and the display gets these voltages:
-pin 6= -97 volts
-pin 7= 86,5 volts
-pin 34= -97 volts
-pin 35= 86,5 volts
I know they should be -100 and +90, but this minor difference can't be the reason that it is not working right? 
Anything else I can test?
20200418_150723 (resized).jpg20200418_160435 (resized).jpgQuoted from chad:Is it an original display, never changed? Most likely out gassed and gone.
It is original yes..
Anything else I can test before I order a new one?
Quoted from chad:I encountered this and just had to replace the display. Unfortunately nothing else...
Thought so too..
Thank you!
You're currently viewing posts by Pinsider robdutch.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cyclone-display-broken?tu=robdutch and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Copley, OH