Hello. I have a strange error on my black rose pinball. When it goes in video mode for knife throw or rigging swing the instruction text has a format problem. The word "fire" is in the same spot as "press" so it's like overlayed. It's like the program says to put that word in the wrong spot. The word "fire" is pulsing so I know that's what it is. The machine was originally deutsch so I'm thinking that could be the source of the problem. I replaced rom U6 with the latest English version and still have the problem. If you look close at the pic you can see what I'm talking about. Any help would be great. Thank you.
-Tom
[IMG]http://i180.photobucket.com/albums/x120/tjc02002/FBE1811B-42E6-49FD-AAD9-D9642FDB08DA-344-000000DE7A641C76.jpg[/IMG] image.jpg

Ha.

Fixed it. There are a series of jumpers on the mpu and one was missing.

W14-18 are jumpers for different countries. USA uses either all or no jumpers while other countries use some. Mine had w18 removed for European so I soldered the jumper back in. These jumpers are on WPC MPU's located on the left side in the middle/ upper area of the board.