After putting back together a Banzai Run I have the following problems;
Insert lamps are not working at all - Confirmed that 18vdc is being generated and delivered to the CPU board.
Pop bumpers are all not working at all.
Is anyone able to offer any suggestions?
Cheers
Ray
I do not believe there is a relay for the insert lamps. Can you post a picture of the boards in the backbox? Or is that a lot of trouble with that game?
1J6 and 1J7 connected to the MPU in the bottom right corner?
No fuse on the underside of the playfield.
I have this weekend fixed the left eject scoop switch which has not actuating when the ball landed in the scoop. Interestingly I now get a 'Hill Closed' message on the display when a rider is available and the ball is shot into the scoop. I don't think the lifter test is working correctly, it doesn't appear to register the upper switch, I have tested this switch in the switch test and it tests correctly. The magnet also appears to have an issue, 700 ohms measured across the coil doesn't sound right to me?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/banzai-run-issues and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Forth
Goodrich, MI
Thetford Mines, QC