how do the contacts in the cab.look?
tripping a few of the key relays may wake up the wizard

good that you have paper work on the game
game should light soon as you turn game on
when start up PF should also light if not lit already.
look for a start relay or reset relay and try carefully turning the score motor a bit

You might have to de- solder the lugs off both flippers coils and take an ohm reading and compare the 2 readings. - hey progress

You know Bally EMs had the worst flipper hardware at that time
when you start adding stronger coils you just end up bending everything down the line
PBR sells a whole rebuild kit - thats what I ended up doing with an old Expressway pin.
-check all the brackets to see how off of 90* it is

you see what happened to that chime unit coil?
and pf contact got stuck and fried away at it - who ever had it never turned it off in time
That game is pretty popular with those flag targets I was told -BV $1375 but you never know?

- nice job
always a good feeling when you wake up a dead pin and bring it back

A soft artist brush and mild dishwater soap / water does a nice job on plastic score reels.

You know wizard these EMs have easy 2D playfields that if your careful and have a good pair of eyes, you can lift the PF and put it back in the cab upside down without having to build a roto-whatever you call em? just make sure you dont smash anything -should only touch in 3 places