New WW.
Blower fan doesn’t work.

I borrowed a working controller board, and the blower works great.

I’m not sure what to measure in between, it’s not a transistor.
Please look at pictures, my pcb has resolderd joints and 1 jumper cable.

The problem is fully isolated to my pcb board, but I don’t know which component.
Fuse and fuse holder is fine

0DBECDB4-3138-4D9B-9CDF-F403DEA88ADC (resized).jpeg

D2D951ED-0B3C-4431-B3D2-3EF88A10D4EE (resized).jpeg

F32370E0-C262-4FDD-9BCC-1A39DF9C1F3C (resized).jpeg

I’ll cut the jumper wire. Thanks.

Will update soon

As I can see, it’s junperd from wrong leg.

I’ll put it on the right one

70E1C23B-95C3-4FFE-BE52-1A3CF9980066 (resized).jpeg

Thank you for all your help buddy

So the trace was broken and the previous owner did make a jumper to the wrong leg, i solderd to the correct leg and now it BLOWS AGAINNNNN, woooohooooooo

Sun is burning hot in Denmark and WW is cooling me down now, so nice

Again thank you

048C8F70-C978-4DAD-B45A-F92CAB221699 (resized).jpeg

Ohhh its great