Harlem Globetrotters On Tour
Bally, 1979My Harlem Globetrotters is missing the wire that connects to the tilt bob.
Can someone point me to a source for the wire? Looks to be bare copper braided wire, but I’m not sure of the gauge or where to purchase.
Any help is appreciated!
(And if you see anything else wrong with that tilt bob, please let me know! 
)
IMG_2701 (resized).jpegI'd use a small solder braid with the rosin cleaned off with alcohol. Something like this: https://www.amazon.com/MG-Chemicals-Desoldering-Length-Yellow/dp/B00
9W78C
Quoted from RellikJM:I'd use a small solder braid with the rosin cleaned off with alcohol. Something like this: https://www.amazon.com/MG-Chemicals-Desoldering-Length-Yellow/dp/B009W78C
Perfect. I have that. Thank you!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/what-type-of-wire-for-tilt-bob?hl=quench and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Long Island, NY