I need a 090-5020-30 data east coil for Hook which is out of stock at marco but it shows on that page the part number (in reference section) 090-5004-00 which is in stock. the specs are different though.

090-5020-30 is 3.8 resistance and 657w
090-5020-30 is 16.3 resistance and 153.4w

are these actually compatible or not?

http://www.marcospecialties.com/pinball-parts/090-5004-00
http://www.marcospecialties.com/pinball-parts/090-5020-30

OK super thanks. I actually am now suspecting that it is the flipper board. I tinkered with it a bit and now the flipper does not work at all.

Going to reflow the headers and see what happens

Will the issue ended up being that the wiring to the coil was not very good at all and now that I rewired it it works perfectly. My friend also had the coil in stock that I was looking for because it turned out that the coil was swollen and the sleeve wouldn't come out so the coil was on its way out anyway. But I find that that coil is not As strong as I'd like it to be for making it up that ramp. I wonder if there is a slightly stronger coil that I could use that would work