That red flasher bulb cover in between the SPECTRE ramps is borrrrrrrring! Replace it with the Rocket City Pinball SPECTRE Ramp Flasher Replacement Mod!

This 6-piece set includes the following components:
- 3D-printed replacement flasher cover
- 3D-printed SPECTRE flasher cover cap
- 3D-printed HexSleeve, in the same color as the flasher cover
- Black washer, lockwasher, and screw
The cap is pressed on with a snug fit from above -- in the orientation of your choice -- after flasher cover installation. (Reference video below.)

NO ELECTRICAL WORK IS REQUIRED! This mod utilizes the existing lighting setup.

This custom flasher cover replacement is a simple but drastic improvement over the original cover for several reasons:
- it sits higher than the original flasher cover, throwing more light into the curved section of the ramp (which in turn reflects it around)
- its top cap includes a negative space in the shape of the SPECTRE logo, tying in the with logo on the nearby ramps
- SPECTRE logo can be installed in your desired orientation (ref video)
- the additional height of the flasher cover maximizes visibility of the top cap, which would be otherwise be partially obstructed by the hex spacer
- the included HexSleeve and black washers/screw help the silver hex spacer hide & blend into the surrounding area instead of clashing/blocking the flasher cover
- flasher cover can be made in the color of your choice to match features in the game or additional accents you've added

The video below demonstrates some (not all) of the various colors available, to help you choose. It's completely up to you! For those unsure, Rocket City Pinball recommends the following colors:
- Yellow, to match the plastics in the back right area of the playfield
- Red, to match the red throughout the game
- White, to bring out the MI6 lights and white bumper bodies
- LE owners might consider Fluorescent Orange or Turquoise to match the t-molding or powder coating, respectively

Overall, the installation is not difficult, but it does involve several steps including removing the ramp assembly. Allow yourself approximately 30 minutes to complete the installation. It's all explained and demonstrated here:

NOTE: This mod will fit all three versions of the game (Pro, Premium, LE).

Save on shipping by bundling with my other 007 mods:
- Interactive Dragon Tank scene: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/07752-interactive-dragon-tank-scene-for-james-bond-pro
- 3D start buttons (SPECTRE designs): https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/07252-3d-start-button-james-bond-007-spectre-versions
- 3D start buttons (Gun Barrel designs): https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/07425-3d-start-button-james-bond-007-gun-barrel-versions
- 3D coin reject buttons: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/07426-3d-coin-reject-buttons-james-bond-007
- Hardware Cleanup Kit: https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/07623-james-bond-007-hardware-cleanup-kit
- SPECTRE Flasher Cleanup Mod (Prem/LE only): https://pinside.com/pinball/market/shops/1282-rocket-city-pinball/07594-spectre-flasher-cleanup-mod-for-james-bond-007