Pin Monk
“Products to make your pinball machine chi more harmonious - pinmonk.com”
“Products to make your pinball machine chi more harmonious - pinmonk.com”
NOTE: Spooky pinball changed their power supplies for Ultraman/Halloween. After analyzing the new (improved) power supply, this fan WILL work in it, but it's not really necessary as it was with Rick and Morty and all prior Spooky pins, so not a critical upgrade for Ultraman/Halloween pins.
My wise teacher Lao Tzu once said, "Silence is a source of great strength." He would have hated Spooky and Multimorphic machines even more than the Stern Spike ones.
Anyone that has a Spooky or Multimorphic pinball machine knows that the fan is WAY TOO LOUD and really annoying, especially in a home environment. Also, unlike the Spike fans that have thermal control and only come on when the power supply heats up, the fan in Spooky and Multimorphic power supplies is ALWAYS ON. This sucks.
This fan kit is designed to replace the stock 34.5dB fan in Spooky/Multimorphic SE-600-48 power supplies to make it almost silent. This replacement 10.7dB fan has less CFM (airflow) than factory one, but since the fan is always running it doesn't make much difference in a home environment where the temperature of the location is already controlled. In testing with this fan installed on multiple machines, the SE-600-48 power supply never exceeded ~101F (the power supply critical shutdown threshold is ~140F), however, all possible pinball machine configurations cannot be known, so you are installing this kit at your own risk. Please refer to the chart that shows the throttling profile of the power supply in these machines included with this listing.
ALWAYS MAKE SURE YOU CAN FEEL AIR FLOWING OUT THE FRONT END OF THE POWER SUPPLY AFTER INSTALLATION IS COMPLETED AND THE PIN IS POWERED ON. Note that replacing the fan in your power supply may void your warranty since you have to open the power supply and shift the circuit board inside to install the replacement fan.
The kit includes the fan with custom wire length made specifically for the SE-600-48 and matching 2-pin connector for a clean, factory look and fit. It also comes with fully illustrated step-by-step installation instructions.
The pinside fan install thread is also located here:
https://pinside.com/pinball/forum/topic/replacing-stern-spike-noisy-ps-fans
NOTE: THIS FAN IS FOR ALL KNOWN SPOOKY AND MULTIMORPHIC MACHINES ONLY. IF YOU HAVE A STERN SPIKE MACHINE, PLEASE CONSULT THE COMPATIBILITY CHART FOR SFAN-001 or SFAN-002.
This item has not been reviewed yet.
$ 20.00
Ships for $ 8.00 Free shipping on orders over $ 100.00 This item does not ship internationally.
In stock
Contact Pin Monk (via PinsideMail)
No reviews have been posted for this item.
Reviews can be written by anyone who has purchased this item.