“The Socket Free LED.”
The Yoppsicle was created with the idea of easily adding a permanent LED while also removing those flaky sockets in classic Bally/Stern games. Simple remove the old socket and slide the stick under the original braided wire, use the original screw to secure, solder the two wires to the pads and forget about it forever. No more flicker and no more dim bulbs... just bright, solid light! Want to use your original lamp driver board? No problem! These work right out of the box without the need for any adapters, LED driver boards or added resistors.
(Note: These will NOT work with the Bally 6803, nor will they work with a lighting matrix, for instance a Williams "Firepower" etc.)
Sold in panels of 50 sticks each.
NOTE: Keep in mind that these aren't well suited for backbox controlled lamps, so if you decide to add LED bulbs to those bayonet style sockets with an original board, you may need to add additional resistance to remove the flicker in the backbox. This will in no way effect the Yoppsicles installed under the playfield.
For sample installation and how-to instructions, follow this link:
From $ 90.00
Price depends on selected item variation.
Ships for $ 9.00 (International $ 40.00)
This ad is linked to 81 games: