Get rid of those ball hang-ups, and save your playfield from further damage! By applying insert mylar, you're not only protecting the insert paint, but the playfield wood and paint around the insert hole. Make sure to measure your insert plastics before ordering to ensure they are the right size. See picture to help measure your insert.

FREE WORLD-WIDE SHIPPING!

There are multiple different Mylar sticker sizes available:
1/2" Circular Insert Leveling Mylar Stickers (22 stickers per order)
3/4" Circular Insert Leveling Mylar Stickers (18 stickers per order)
5/8" Circular Insert Leveling Mylar Stickers (22 stickers per order)
7/8" Circular Insert Leveling Mylar Stickers (16 stickers per order)
1" Circular Insert Leveling Mylar Stickers (14 stickers per order)
1 3/16" Circular Insert Leveling Mylar Stickers (12 stickers per order)
1 1/4" Circular Insert Leveling Mylar Stickers (12 stickers per order)
1 1/2" Circular Insert Leveling Mylar Stickers (5 stickers per order)
1 3/4" Circular Insert Leveling Mylar Stickers (4 stickers per order)
2" Circular Insert Leveling Mylar Stickers (4 stickers per order)
2 3/4" Circular Insert Leveling Mylar Stickers (2 stickers per order)
Triangular (1.5" x 5/8") Insert Leveling Mylar Stickers (10 Stickers per order)
3" x 8.5" Large Rectangular Insert Leveling Mylar Stickers (1 large sticker per order) - Use these to create custom Insert Shapes
A Variety Pack with our most popular sizes is also available (5/8", 3/4", 7/8", 1", and 1 3/16")

Not sure which sizes to order?
The most commonly used insert sizes in the 1960s-1980s were 5/8", 3/4", 7/8", 1", and 1 3/16". You can order our VARIETY PACK which includes all of these sizes at a discount!

Instructions:
Before applying, make sure to clean the insert plastic. Then, apply using a tweezers with appropriate lighting. Firmly secure by applying pressure. Done!


FAQs
Q: Should I apply the mylar stickers to inserts AFTER I wax the playfield?
A: I suggest you wax before applying the stickers just because it gives a small layer between the insert and playfield in case you decide you want to remove or replace them in the future—makes it easier to remove. It also protects the insert’s artwork. You can put them on before waxing too, they shouldn’t hurt the insert or playfield if removed in the future, but it’s better to be safe, in my opinion.

Q: Are the stickers permanent?
A: The stickers, if applied correctly, will last many, many years. A lot of people won’t even know you have them on your inserts, they are so thin and transparent.
If you start stacking them because of severe cupping, the stickers might be more noticeable when the machine is turned off. When the insert is lit up, the stickers aren’t noticeable when stacked.

Q. After I apply them, can I still clean and wax the PF at a later date? Will naphtha cause any issues with the mylar stickers?
A: You can treat the Mylar stickers as if they are now part of your playfield. You can wax them, use naphtha (applied first to a rag before wiping), or whatever else you need to do to keep your playfield looking good. If you pour naphtha directly on the playfield, (which I don’t recommend) and not on a rag first, you might have naphtha getting under the sticker which might cause it to unstick (you’d just have to replace with a new sticker). Avoid this by applying the cleaner to a rag first.