“Mods designed to be stupid simple”
PLEASE CAREFULLY READ EVERYTHING IN THIS LISTING BEFORE PURCHASING.
Stern's Expression Lighting is probably one of the single most eye catching things to happen to rock themed pinball games in a long time. We've taken that and extended it for the undercabinet light loving crowd, bringing you a fully interactive light kit that lights up exactly like the expression lights! 96 bright LEDs (48 per side) duplicate the Expression Light shows, light for light, in real time, but under the cabinet, creating a room lighting underglow that feels like you're at a concert!
We introduce to you, the Outpost Kodelia Expressive Undercabinet Lights Kit!!
We took extra care in how we went about managing installation of the kit. You may have seen other undercabinet light kits slowly peeling away from the cabinets as gravity does its work and overcomes the adhesive... this just wouldn't do for us, so we designed a special set of mounting devices. Not only will these keep the strips from falling, but they also manage the extra data wires that must be passed around on these interactive lights and they help guide installation to ensure you get everything in the right place. Additional hardware is included to help route wires and secure components. We also took care to ensure our kit will not interfere with pin lifts (including the Harbor Freight lifts) or 'soldiering' your pin for transportation.
Best of all, these can happily coexist with our Expressive Speaker Light Kit for the ultimate interactive lighting experience unlike anything you've ever seen on a pinball machine!! Check out the video link below to see the whole thing in action!! You can find them here: https://pinside.com/pinball/market/shops/1326-ninjacamp-mods/07090-expressive-speaker-lights-kit
COMPATIBILITY DETAILS - !!READ THIS CAREFULLY!!:
This kit is compatible with both Rush and Led Zeppelin (and likely any future Stern pins to use Expression Lighting), so long as the game already has an Expression Light Kit installed. If your game does not have expression lighting, these will not work. This kit relies on the existence of the Node 2 board on the lower left side wall of the cabinet. Games without expression light kits do not have this Node 2 board, and therefore will not work with this kit. In addition to preinstalled Expression Lights, this is also compatible with the Expression Light upgrade kits provided by Stern.
Installation will involve screwing a small interface PCB into the inside of the cabinet near the Node 2 board, plugging and unplugging wires, drilling a 5/8" hole in the bottom of the cabinet (custom rubber grommet/plug included for a clean and protected installation) OR cutting the wire grid on one of the vent holes, sticking down and plugging in a small power transformer in the backbox.
NO soldering, NO splicing, NO permanent electrical modifications.
IMPORTANT NOTES ON POWER:
This kit will draw up to 2/3 of an amp (or 30w) from the 48v CN7 power plug (when all expression lights are on full and white), but generally much less. While this is fairly low, it is up to you to ensure you are not overloading your power system with too many accessories, which could lead to game stability issues or power supply failure.
If you already have something plugged into the 48v CN7 plug on the power board in the lower right side of the backbox, OR if you are buying this with one or more of our other Expressive Light kits, you will need to order at least one of our 48v power splitters:
If you wish to provide your own independent power source, you can plug the included transformer into any capable 48v power supply (e.g. a MeanWell LRS-350-48 or similar, just ensure it has enough amperage to run whatever you wish to plug into it), but you are on your own to figure out how to set that up properly.
- If you have already purchased our Expressive Speaker Light kit, select the option WITHOUT the interface board.
- If you have NOT already purchased our Expressive Speaker Light kit, select the option WITH the interface board.
- If you're purchasing both at the same time, just make sure one of them includes the interface board and one does not, it doesn't matter which.
Check out the video linked below, the photos simply do not do this justice!
Please note that I hadn't finished securing the wire or fully adhering the light strips when I made this video... what can I say, I got excited! :D
Timeline: We don't yet know what demand for these will be. If we're overwhelmed with orders, it could take up to three weeks to ship out your product, but generally they will ship out within a few days. We appreciate your business and you can rest assured that we are moving as fast as possible.
Disclaimer: Since it is not possible to tell what damage existed before installing this kit, NinjaCamp cannot be held accountable for damage believed to be caused from our product or the installation or operation thereof. By purchasing this mod you agree not to hold NinjaCamp or its partners liable for damage to the cabinet, electronics, or any other part of the machine that may occur now or in the future.
Warranty: NinjaCamp will replace this part at our cost if it fails to function properly during the course of "normal usage", for up to six months from the date of purchase. NinjaCamp has the right to define "normal usage" on a case by case basis, and may request evidence to confirm the failure.
From $ 140.00
Price depends on selected item variation.
Ships for $ 12.00 (International $ 25.00)
Contact NinjaCamp (via PinsideMail)
This ad is linked to 3 games:
This page was printed from https://pinside.com/pinball/market/shops/1326-ninjacamp-mods/07647-expressive-undercabinet-lights-kit and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.