This listing is for a complete set of (2) Slingshot and (2) Return Lane MOD's for William's BSD pinball machine.

This is EASY MOD to install and and takes about 20 min.
You simply remove the existing hardware (don't need the large washers under the Slings if you have them). Then just place your new protecting pieces
underneath your existing plastic pieces and then simply tighten everything back down. Also, depending on your set up you may need a nut or two or longer post threads. All are available from your normal pinball parts guys.

Custom laser cut Dark Blood Red translucent acrylic. This MOD PROTECTS your pinball machine's plastics and adds a great affect, pics dont do justice!

Note: The return lane plastics will replace the middle factory stock stainless steel set. Also, in the pictures I have removed my cheesy character plastics above the slings and added red posts to the factory slings where the mounting post would have been. You dont need to remove them, I did because I didnt like them. Any questions feel free to send me a message.

Shipped with paper/film masking to protect the acrylic during shipping. You will need to peal this off before installing.

If you have any questions please don't hesitate to ask.