This listing is for a complete set of (2) Slingshot and (2) Return Lane MOD's for Stern's Elvira's House of Horrors pinball machine with optional grave marker plastic.
This is EASY MOD to install and and takes about 10 min.
Only tool you need is a Phillips head screwdriver.
You simply remove the existing hardware (don't need the factory large washers under the Slings). Then just place your new protecting pieces
underneath your existing plastic pieces and then simply tighten everything back down.
Custom laser cut dark red translucent acrylic. This MOD PROTECTS your pinball machine's plastics...
There are 4 different sets to chose from:
1. Dripping blood (EHOH001)
2. NO Dripping Blood, clean family friendly look (EHOH002)
ADDED Mirrored Grave Marker:
3. Dripping blood (EHOH003) w/grave marker
4. NO Dripping Blood, clean family friendly look (EHOH004) w/grave marker
-----Grave marker options-----
This Grave marker MOD helps to see the flashing insert on the right orbit lane that is being blocked by the spinner.
This is EASY MOD to install and and takes about 2 min.
You simply remove one existing screw and add the Grave Marker in the same spot (see pics for location). Screw back down and adjust as needed. The grave marker is bent at about 105 deg so you can get some variance depending on your viewing angle.
and custom text.
For ALL text and custom text (YOU MUST LEAVE ME A MESAGE ON WHAT TEXT YOU WANT), try and keep it around 8-9 characters for the custom text. It will also be in the font shown for the ELVIRA and DEADHEAD.
IF NO TEXT IS MENTIONED IT WILL BE SENT WITH NO TEXT!!!
Slings and Return lane plastics are shipped with paper/film masking to protect the acrylic during shipping. You will need to peal this off before installing.
If you have any questions please don't hesitate to ask.
From $ 19.95
Price depends on selected item variation.
Ships for $ 5.00 (International $ 15.00)
Contact SilverBall Designs (via PinsideMail)
This ad is linked to 2 games: