PinDoc Restorations

“Precision Playfield Restoration Tools”

» Back to PinDoc Restorations home


Shop highlight!

PinDoc Restorations

PinDoc Pinball Playfield Rotisserie


Item description

The PinDoc Rotisserie is constructed of 16 gauge, 1" square steel tubing, and is built to last. The rotation brackets are built from 1" wide, 1/8" thick angle steel, and their rotation resistance can be dialed in from loose, to locked-down with the turn of a pair of hand-knobs. No wrenches required. The poly-bearing design ensures smooth rotation that will not damage the rotating axles like bolts will. The Rotisserie is designed to accommodate all playfields up to up to a 30" wide. All Rotisseries disassemble very nicely when not in use, and can be stored in the shipping box and placed on a shelf. All hardware including thumb-screws are included. However, C-clamps are NOT included.

Be sure to see Cary Hardy's review on the PinDoc Rotisserie:

The PinDoc Pro Rotisserie does NOT include any extenders to link the a-frames together. It is HIGHLY RECOMMENDED that at a minimum, you use 1/2" electrical conduit (not included) to link the a-frames together. This conduit can be purchased at any home-improvement store for less than $5.00. The electrical conduit works very nicely if you are on a tight budget. This item will arrive in bare metal finish and will retain some of the factory-applied rust inhibitors on the surfaces which must be cleaned off prior to any painting. I highly recommend either painting or oiling the Roto to prevent rust on the bare metal surfaces.

The PinDoc Premium Rotisserie includes the 16 gauge, 1" and 3/4" square tubing extenders to link the A-frames together. The extenders are adjustable to fit any length of playfield. This item will arrive in bare metal finish and will retain some of the factory-applied rust inhibitors on the surfaces which must be cleaned off prior to any painting. I highly recommend either painting or oiling the Roto and extenders to prevent rust on the bare metal surfaces.

The PinDoc LE Rotisserie includes the 16 gauge, 1" and 3/4" square tubing extenders to link the a-frames together, and is bead-blasted and professionally finished in a durable powder-coat. The 3/4" end pieces that slide into the A-frame and the center extensions will remain unfinished because they tend to get scratched up from normal use. These end pieces really look nice when cleaned up and lightly oiled, or can be painted if you prefer. I can typically offer custom powder-coat colors too. Please refer to the most popular powder-coat colors shown below.

OPTIONAL SIDEKICK AND SLIDERS ARE NOT INCLUDED. THEY MUST BE PURCHASED SEPARATELY.

REGARDING DELIVERY.
In general, I build all products during the last week of a given month and normally ship before the end of that month. This means that delivery for products can take up to 30 days depending on when the order is placed. All powder-coated products will typically take an additional 2-3 weeks to be delivered.


PLEASE REFER TO "SHOP POLICIES" ON THIS PAGE FOR ADDITIONAL INFORMATION REGARDING INTERNATIONAL SHIPPING AND DELIVERY.



Item photos

Untitled (resized).png
pro (resized).png
Prem (resized).png
RedPC (resized).png
Pivot2 (resized).jpg
Untitled (resized).png
Untitled (resized).png
pasted_image (resized).png
pasted_image (resized).png
Untitled (resized).png
10 (resized).png
PinDoc Rotisserie Setup Instructions6.pdf (PDF preview)
madeinusa (resized).jpg



Order now!

Pick a variation

PinDoc Pro Rotisserie Almost out of stock

$ 235.00

PinDoc Premium Rotisserie Almost out of stock

$ 280.00

PinDoc LE Rotisserie Almost out of stock

$ 360.00




Price

From $ 235.00

Price depends on selected item variation.

Free shipping! (International $ 0.00)



Listed in

Maintenance > Tools


Questions?

Contact PinDoc Restorations (via PinsideMail)





Other items in this category

From: $ 70.00
From: $ 195.00
From: $ 140.00