PinWooferTM - SAM Super Kit - Advanced Pinball Audio

Please note: this kit includes the following add-on options i) an amplifier mounting bracket.

Our system delivers exceptional tonal quality and unprecedented clarity of call-outs, sound effects and music:
 Add presence to your title and unlock the true potential of the audio track
 Industry leading electronics - 100% in-house design
 Industry leading speakers - the absolute best pinball speakers available
 Easy to install, incredible results

Speakers and Mounting Rings:
8in Cabinet Speaker:
 PinWoofer Label PW-8, 8in, Dual Voice Coil, 120W RMS, 400W MAX, 2Ohm Cabinet Woofer
 This speaker runs two voice coils in parallel for maximum power transfer to the driver
 Unprecedented bass response featuring an industry high, 91.5dB sensitivity rating
 Rigid, 8in PVC injection molded Woofer Mounting Ring with Hardware to provide maximum coupling to the enclosure
 For Metallica and The Walking Dead, please verify your cabinet speaker mounting ring needs (refer to the photo that shows the converging playfield supports). If you have converging playfield supports, you will need to select the correct option so that we can supply an offset ring which will offset the speaker to the left and allow the magnet to clear the playfield supports when the playfield is down. Otherwise, the playfield will not close after installation
12in Cabinet Speaker ACDC Only:
 Found on mixed versions of ACDC only
 Goldwood GW-1244 Polypropylene / Rubber upgraded cabinet speaker; this speaker has superior materials compared to the fac-tory paper / foam speaker and a tighter suspension for improved bass response
 Please confirm your speaker size prior to ordering. You cannot change the speaker size between 8in and 12in

4in Backbox Speakers:
 PinWoofer Label PW-4, 4in, 30W RMS / 180W MAX Coaxial Speaker Pair
 Industry leading 0.75in Silk Dome Tweeter for ultra-smooth re-sponse
 PinWoofer 4in Mounting Ring Pair with Hardware

Electronics:
 PinWoofer “Glass Tamer +” (a.k.a. GTP) Amplifier:
 Pre-amplifier Stage with Auto-Muting for noise reduction; espe-cially helpful for older machines that have developed "buzz" or "hum" over time.
 Mixed differential input; a Ground Loop Isolator is required, and included with the kit
 Input Gain Control
 2.1 Amplification sections - 50Wx50W Backbox and 100W Cabi-net Final Stage*
 Adjustable Bass Cutoff Frequency
 Adjustable Cabinet Bass Level
 Adjustable Backbox Volume
 Treble Adjustment
 Studio level line-output for external monitor, streaming or powered subwoofer
 PinWoofer SAM Expander Board:
 Plug and Play Audio Board – Converts audio out to Compatible Input
 PinWoofer Power Board:
 Plug and Play Power Board – dedicated power source - no splitter or other power sharing solution needed
 PinWoofer Platform Harness:
 Plug and play harness to interconnect all components effortlessly

Amplifier Mounting Bracket:
 The PinWoofer Amplifier Mounting bracket is popular and functional and allows you to remove and replace the amplifier to a fixed location, as you may occasionally remove the amplifier and place it on the playfield glass to make adjustments. The bracket is secure enough to allow you to transport your machine without removing the amplifier.

PinWoofer Spike-2 GT Installation Instructional Video:

* Average maximum amplifier power in application can be approximated by taking the prod-uct of the MAX power rating per channel and 1/(√2*1.5).