Pin Monk

“Products to make your pinball machine chi more harmonious - pinmonk.com”

» Back to Pin Monk home


Biz information Shop home

Pin Monk

Tibetan Breeze Spooky Rick and Morty 3 Flipper Cooling Kit


Item description

At last, I have completed adapting the Spike2 flipper coil cooling kit so it works on Rick and Morty as well, providing much-needed relief from long-play weak flippers and excessive heat on the playfield near the flippers. There is quite a story about how these kits came to be, but rather than re-tell it here, if you go to the Spike2 Tibetan Breeze page, it is all there for you to enjoy at your leisure.

Now that this kit exists in Spooky form, the benefit is yours to claim. All you need to do is purchase a kit and spend 10-15 minutes installing it in your Rick and Morty pinball machine. Rick and Morty and the results of the coil temperature testing are posted in the pictures of this listing. The remaining Spooky machines will be tested soon, but one thing is clear: all the machines benefit from the breezes it creates.

Each Rick and Morty-specific 3 Flipper Kit is packed in a custom product box that contains:
3 x Fans (now with 50% more CFM!)
3 x Angled fan brackets with hardware
1 x Fuse-protected power adapter with rectifier diode
2 x 7.5 foot cable to connect fans to power adapter
18 x Zipties for a clean installation
1 x Complete illustrated instructions for installation

Spike2 kits WILL NOT WORK on Spooky machines.

WHAT CAUSES FLIPPER COIL FADE?
In general, with coils you're fighting the laws of thermodynamics. Energy (power) sent to the coil is converted to action and heat, and if there's not enough time between pulses to let the heat dissipate, the heat continues building, which increases electrical resistance of the coil windings, requiring more power for the same work which increases heat, in a loop. Unlike the other coils in the game, the flippers are firing all the time with few pauses of more than a few seconds, so they just build up heat, which affects their performance over time. Some games are better at building pauses into the action that gives the coils time to cool for short bursts. These fans help continuously dissipate the heat to prevent heat buildup and in turn, keep electrical resistance to a minimum.

Here's a really easy to understand explanation of electrical resistance with an experiment:
https://nationalmaglab.org/education/magnet-academy/watch-play/interactive/heat-resistance

SHOULD I WORRY ABOUT FLIPPER COIL FADE?
If your playing time is sessions of 30 minutes or less, you don't have to worry about fade. It only happens over time and usually isn’t noticeable for 40 minutes or more if you start with a “cold” game. However, once the fade starts, it only gets worse unless you let the machine rest (allowing time for the heat of the coils dissipate). This fan kit prevents the coils from heating up past 100-110F, staying well below the threshold where fade begins no matter how long you play.

WHAT TEMPERATURE DOES FADE BEGIN?
There really isn't a hard answer for this because the player perceiving weakness is well after fade has actually started. It initially manifests as missed or bricked shots that you can easily make earlier in the game. It also depends on the size of the coil and whether or not it's dual wound. Larger coils can get hotter before they feel weak to the player because they're powering through the electrical resistance. However, larger coils are more destructive to the playfield because cold, they have much more power to launch the ball at targets, ramps, and plastics and that can damage them faster. But, generally speaking for all but the largest coils (most Sterns) fade starts around 130F, and the flippers begin feeling weak to the player around the high 140s to low 150s. Spooky and JJP can go higher before showing signs if they're using larger coils, but fade for long play sessions is a problem for all of them.

DO ALL STERN/SPOOKY/SPIKE MACHINES HAVE FLIPPER COIL FADE?
All Spike and Spooky machines are being tested and so far there is a range of fade, from none (Star Wars) to severe (Stranger Things) with most pins in-between (JJP machines are being temp-tested now, and definitely have fade for long sessions). Check the chart we have provided for the machines we’ve tested. Each machine is rated from “None” to “Severe.” If you don’t see your machine on the list and aren’t sure if you have it, we will eventually have them all tested, keep checking back or ask around. If you feel the effects of fade, no need to wait for us to confirm it.

ARE THESE MAGIC FLIPPER-FIXING DEVICES?
No. These kits are ONLY designed to keep the flipper performance consistent for as long as you play by keeping the temperature of the coils around 100-110F, well below the beginning-of-fade threshold of about 130F. They will not give you magical pinball skills or let you fire off laser-focused shots suddenly. They will only let you play as well as you do on a "fresh" machine, even if your machine has been played for hours with these installed.

ARE THESE AVAILABLE FOR <insert pinball machine here>?
Currently there are plug and play pinmonk flipper cooling kits available for Spike, Spike2, and Spooky Rick and Morty, and JJP Guns n Roses. Other machines will be coming soon.



Item photos

3-flipper-spooky-kit (resized).jpg
3-flipper-spooky-kit-2 (resized).jpg
Rick and Morty Stock Flipper Temps (resized).jpg
spooky testing chart (resized).jpg



Order now!

Pick a variation

3 Flipper Rick and Morty Tibetan Breeze Coil Cooling Kit In stock
$ 210.00



Price

$ 210.00

Ships for $ 8.00 Free shipping on orders over $ 100.00 This item does not ship internationally.

In stock



Listed in

Parts > Flipper parts


Questions?

Contact Pin Monk (via PinsideMail)




Linked to games

This ad is linked to 2 games:



Other items in this category

$ 130.00
$ 210.00
Flipper Parts
Flipper parts

Find other relevant mods/parts!

Click here to find other mods for Rick and Morty (Standard)!

Click here to find other mods for Rick and Morty (Blood Sucker Edition)!


This page was printed from https://pinside.com/pinball/market/shops/1170-pin-monk/04674-tibetan-breeze-spooky-rick-and-morty-3-flipper-cooling-kit and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.