Shop highlight!

Gameroom Mods

Medium/Large RGB LED Clocks/Display


Item description

Extensive details about extremely similar displays can be found in some previous threads:
https://pinside.com/pinball/forum/topic/interest-check-run-dmd-clock-winter-2018-batch
https://pinside.com/pinball/forum/topic/interest-check-run-dmd-clocks-2019-batch

This listing includes LED displays similar to the Medium Gameroommods RGB displays and the J_M_ RGB style displays. Some key specs of the Clocks/Displays are as follows:
- Each display has 2x 64x32 LED panels mounted side by side for 128x32 dot resolution.
- Each display has the same number of pixels as a Pinball DMD - 4096 pixels total.
- The panels use the larger LEDs to make the pixels look as close together as possible.
- Medium RGB Run-DMD Clock/Display (P5) = 26.0"W x 7.0"H x 2.00"D
- Large RGB Run-DMD Clock/Display (P6) = 31.0"W x 11.0"H x 1.75"D

The "Run-DMD White" versions integrates the following into the fully assembled display:
- Run-DMD White Clock/Displays can only show a single color at a time
- User can switch between red, green, blue, yellow, magenta, teal or white
- Can run your own animations and graphics plus those created by others
- 1x Run-DMD White with un-programmed SD card pre-installed
- 1x Run-DMD Edge/White cardboard insulator
- 2x Medium (P5) or Large (P6) RGB LED panels
- 1x Laser-cut Front acrylic grey tint panel
- 1x Laser-cut Rear acrylic grey tint or black opaque panel
- 1x Power harness
- 1x Power switch right-angle cable (~12") - Pictured
- 1x Power brick - 10a/5v - Pictured
- 1x Power cord - 4' (not provided for orders shipped outside North America)
- 2x data cable for connecting the LED panels to one another and to the controller.
- 1x All the hardware for mounting everything together.

The "Wireless Programmable" versions integrates the following into the fully assembled display:
- Can be used as a "message sign" as you may have seen in many storefronts.
- When programming nearly unlimited colors can be shown at once. This a "full-color" display.
- Programmable versions are "Run-DMD Ready" and are upgradable to a Run-DMD White
- 1x Generic Wireless LED panel controller with a test program preinstalled on it.
- 1x IR remote integrated into the above controller.
- 1x Run-DMD Edge/White cardboard insulator (not installed)
- 2x Medium (P5) or Large (P6) RGB LED panels
- 1x Laser-cut Front acrylic grey tint panel
- 1x Laser-cut Rear acrylic grey tint or black opaque panel
- 1x Power harness
- 1x Power switch right-angle cable (~12") - Pictured
- 1x Power brick - 10a/5v - Pictured
- 1x Power cord - 4' (not provided for orders shipped outside North America)
- 2x data cable for connecting the LED panels to one another and to the controller.
- 1x All the hardware for mounting everything together.
NOTE: A Run-DMD is NOT included with this option.

The "Basic Programmable" versions integrates the following into the fully assembled display:
- Can be used as a "message sign" as you may have seen in many storefronts.
- When programming nearly unlimited colors can be shown at once. This a "full-color" display.
- Programmable versions are "Run-DMD Ready" and are upgradable to a Run-DMD White
- 1x Generic LED panel controller with a test program preinstalled on it.
- 1x Run-DMD Edge/White cardboard insulator (not installed)
- 2x Medium (P5) or Large (P6) RGB LED panels
- 1x Laser-cut Front acrylic grey tint panel
- 1x Laser-cut Rear acrylic grey tint or black opaque panel
- 1x Power harness
- 1x Right-angle power connector - Pictured
- 1x Power brick - 10a/5v - Pictured
- 1x Power cord - 4' (not provided for orders shipped outside North America)
- 2x data cable for connecting the LED panels to one another and to the controller.
- 1x All the hardware for mounting everything together.
NOTE: A Run-DMD is NOT included with this option.

The Combo 2-pack versions
- 1x Run-DMD white display
- 1x "Wireless Programmable" display

Mounting/Displaying
- Mount on the wall - There are 2 keyholes 16" on center
- Place on a shelf or desk - The display is stable when sitting on a flat level surface.

Note in cutouts and holes in the back panels
- Did not include the battery change hole in the rear panel because frankly it was impossible to use.
- Did not include the ICSP header cutout. Firmware is rarely upgraded.
- Did include additional holes for programmable controllers

Run-DMD Display approximate size reference
- Pinball DMD (p2.5) (Single color) - 15.0"W x 5.25"H x 1.75"D
- Mini (P3) RGB Run-DMD Clock/Display - 16.0"W x 4.5"H x 2.50"D (Not pictured)
- Small (P4) RGB Run-DMD Clock/Display - 21.0"W x 6.0"H x 1.75"D
- Medium (P5) RGB Run-DMD Clock/Display - 26.0"W x 7.0"H x 2.00"D
- Large (P6) RGB Run-DMD Clock/Display - 31.0"W x 11.0"H x 1.75"D
- Jumbo (P7.62) RGB Run-DMD Clock/Display - 39*.0"W x 15.25"H x 2.00"D
- Giant (P10) Yellow Run-DMD Clock/Display - 51.5"W x 14"H x 1.75"D (+ Message - Prototype pictured is 51.5"W x 20"H x 1.75"D)



Item photos

20211006_122859 (resized).jpg
20211006_122946 (resized).jpg
20211006_124038 (resized).jpg
20211006_124115 (resized).jpg
20210916_204714 (resized).jpg
20210916_204728 (resized).jpg
20210916_204748 (resized).jpg
20210916_204810 (resized).jpg
20210916_204822 (resized).jpg
20210916_204850 (resized).jpg
20210916_204907 (resized).jpg
20210916_204955 (resized).jpg
20210916_205008 (resized).jpg
20210916_205016 (resized).jpg
20210916_205023 (resized).jpg
20210916_205036 (resized).jpg
4b27c03cf1653a27521d0ade0a7f5cd4c9972975 (resized).jpg



Order now!

Pick a variation

1x Medium (P5) RGB LED Clock/Display - Run-DMD White In stock

$ 450.00

2x Medium (P5) RGB LED Clock/Display - Run-DMD White 2-pack In stock

$ 825.00

2x Medium (P5) RGB LED Clock/Display - Combo 2-pack In stock

$ 700.00

1x Medium (P5) RGB LED Clock/Display - Basic Programmable In stock

$ 300.00

2x Medium (P5) RGB LED Clock/Display - Basic 2-pack In stock

$ 525.00

1x Medium (P5) RGB LED Clock/Display - Wireless Programmable In stock

$ 325.00

1x Medium (P5) RGB LED Clock/Display - Wireless 2-pack In stock

$ 575.00

1x Large (P6) RGB LED Clock/Display - Run-DMD White In stock

$ 500.00

1x Large (P6) RGB LED Clock/Display - Run-DMD White 2-pack In stock

$ 925.00

1x Large (P6) RGB LED Clock/Display - Combo 2-pack In stock

$ 800.00

1x Large (P6) RGB LED Clock/Display - Basic Programmable In stock

$ 325.00

1x Large (P6) RGB LED Clock/Display - Basic 2-pack In stock

$ 575.00

1x Large (P6) RGB LED Clock/Display - Wireless Programmable In stock

$ 375.00

1x Large (P6) RGB LED Clock/Display - Wireless 2-pack In stock

$ 675.00




Price

From $ 300.00

Price depends on selected item variation.

Ships for $ 35.00 This item does not ship internationally.







Other items in this category

From: $ 5.00
Gameroom - Decorations
From: $ 1.00
From: $ 1.00
Gameroom - Decorations