This listing includes parts and components several options for P5 displays similar to the Medium Gameroommods RGB displays and the J_M_ style displays. The overall size of these displays is Size: ~26" x 8" x 1.5".

P5 open frame kits
This kit is deigned for P5 RGB Hub75 panels with the following specifications.
Panel size: P5 panels 320mm wide by 160mm tall x 20mm deep. The display would almost always be 2 panels wide so the total panel footprint would be 640mm x 160mm. Standard mounting holes on stock kits is 304MM apart horizontally with one equidistant in the middle x 144mm & 140mm vertically top to bottom mounting hole. See image for additional details.
NOTE 1: NONE of the kits include an LED controller like a Run-DMD White or a Boston Pinball Company's "Pinball Animated Clock Controller Board for 128x32 HUB75 RGB DMD Display"
NOTE 2: Most of these kits do NOT include the LED panels.

The Medium RGB standard BASIC open frame kit includes the following items.
1x Front acrylic grey tint
1x Rear acrylic grey tint or black opaque depending on inventory.
1x hardware kit for mounting panels to be back panel, controller to back panel, and LED panels to the back panel.
1x Boston Pinball cardboard insulator

The Medium RGB standard FULL open frame kit includes the following items.
1x Front acrylic grey tint
1x Rear acrylic grey tint or black opaque depending on inventory.
1x hardware kit for mounting panels to be back panel, controller to back panel, and LED panels to the back panel.
1x Boston Pinball cardboard insulator
1x Power harness for P5 panels with 2 panel connections and a place to connect to the controller terminal block (assuming it has one.)
1x Power brick - 10a/5v
1x Power cord - 4' (not provided for orders shipped outside North America)

The Medium RGB standard COMPLETE open frame kit includes the following items.
1x Front acrylic grey tint
1x Rear acrylic grey tint or black opaque depending on inventory.
1x hardware kit for mounting panels to be back panel, controller to back panel, and LED panels to the back panel.
1x Boston Pinball cardboard insulator
1x Power harness for P5 panels with 2 panel connections and a place to connect to the controller terminal block (assuming it has one.)
1x Power brick - 10a/5v
1x Power cord - 4' (not provided for orders shipped outside North America)
2x data cable for connecting the LED panels to one another and to the controller.
2x Medium (P5) RGB LED Panels Kit - Includes 2 tested panels, power cable, and 2x data cables.

CUSTOM frame/hole layout option is so you can provide custom sizing for the display. This option requires you to provide the custom dimentions hole spacing and we would cut to your specifications.

Note there is some variation in the hole spacing on various P5 LED panels. It's likely the standard holes will match the panels you have but it's also possible they won't. If they don't you'd simply need to enlarge the holes or drill new holes depending on how far off the holes are. Alternatively measure your hole spacing and provide them and we will cut them to your specifications.

MTO: Means this item is made to order and will take about a week to ship.

Accessories
- Power Extension 20" Right-angle switched 5.5x2.5/2.1 M/F
- Power connector - Right-angle adapter 5.5x2.5/2.1 M/F

Other components for building your own display
- Medium (P5) RGB LED Panels Kit - Includes 2 tested panels, power cable, and 2x data cables.
- Power supply 5v/10A w/5.5x2.1 connector - Just like the one included with the kits above.
- Run-DMD Edge or White Cardboard insulator - Just like the one included with the kits above.
- Medium (P5) Open Frame Hardware - Just like the one included with the kits above.