“Electronic parts for pinballs”
Custom solution for SECURITY PIC.
➜ Get your SECURITY PIC programmed with the serial number you want.
This on-demand service allows collectors to replace a SECURITY PIC (WPC-95), while retaining the original pinball serial number (printed on the labels and displayed at startup). It also allows you to personalize your family pinball, for example with the date of birth of one of your children.
When ordering, please specify by mail, the number you want (it has 3 + 6 + 5 digits):
◾ The complete serial number is displayed at startup.
◾ The first three digits correspond to the pinball model.
◾ The partial number (6 digits) is printed on the circuit as well as on the labels in the cabinet.
◾ The additional number (5 digits) is not repeated anywhere.
Only the pinball model will be controlled by the system, for the others digits, you can use any serial number (6 + 5 digits). Generic numbers (such as 123456 or 999999, etc.) are not accepted.
If in doubt, send us a photo of the labels with the original number.
The installation is simple, just remove from its support the original circuit (G10) and put the received one instead. Be careful to insert the component in the correct direction (check the location of the notch, or graduation, before power-on).
♻ This item is also available in our online store: ♻
♻ ☞ https://www.flipprojets.fr/shop/ ☜ ♻
From € 40.00
Price depends on selected item variation.
Free shipping! (International € 0.00)
Contact FLIPPROJETS (via PinsideMail)
This ad is linked to 14 games: