“LED displays for Zaccaria, Bally/Stern, Williams/Data East and Zaccaria parts”
This tester will help you to quickly and easily test your Bally/Stern & Zaccaria displays.
How many times you have been dreaming of an automatic tool which would run test animations on your displays without having to use an original MPU or a manual dip switch to send basic combination to the display decoder?
Your dream has become true with the new PinballSolutions display tester.
This is an automatic tool which runs 4 different cycles of tests in order to test all combinations and segments of your plasma or LED Bally/Stern/Zaccaria displays.
The different cycles are indicated by the BarGraph LED installed
This tester is compact and easy to use, you just need to plug it on the J1 header of the display (for Bally/Stern) or connect to a 20 pins flat ribbon cable (for Zaccaria) and provide the power.
Two options are available:
- For LED displays you can power it up using the USB cable provided with the kit and an USB power source;
- For old plasma displays you must provide the HV from an external power source in addition to the USB power.
This tester is portable and can be used wherever you want, if on LED displays, as no HV is needed.
The USB power cord gives you the possibility to connect and power it from a normal USB port (power bank, laptop, PC, USB power supply, ...)
A 2 pins 3.96mm (1.56 inches) male/female header is provided in order to help plugging the HV for the correct functioning of the original plasma displays.
This tester is sold already assembled and tested.
This tester includes:
- The main tester board;
- 2 pins male/female header 3.96mm;
- An USB power cable.
From $ 45.00
Price depends on selected item variation.
Ships for $ 10.00 (International $ 25.00)
Contact PinballSolutions.eu (via PinsideMail)
This ad is linked to 107 games: