“A new perspective on pinball mods”
AC/DC Luci Lighted Magnetic Hinge Covers-Red-110V Edition
*This product listing is for the 110V/220v Power Supply version Shown in blue on our included parts photo! If you need the other power supply version, please see our other listing for this product!*
Give your games a custom look with Lighted Magnetic Hinge Covers! Light up your game hinges with an amazing lighted enhancement. Whether your game sits by itself or are in a row of many games, our Lighted Magnetic Hinge Covers are visible from across the largest venues. This mod is one of the easiest mods you will ever install.
Lighted Magnetic Hinge Covers have a magnet sheet on the back, and an electroluminescent panel (EL Panel) in the center. In addition, they are covered in outdoor grade vinyl to give a custom look.
The Lighted Magnetic Hinge Covers are custom cut to fit exactly the size of your hinge. There’s a small factory fit hole in the hinge to make room for the pivot point, so they’re calibrated to your game. They are as easy to lay on your back box hinge as placing a magnet on your refrigerator!
We have also made the electronics as easy to install as plugging into a power outlet, literally.
We offer two power adapter options to select from- both are plug and play, and easy to install. Both come with online instructions and video instructions online.
*This product listing is for the 110V/220V Power Supply version Shown in blue on our included parts photo! If you need the other power supply version, please see our other listing for this product!*
Option 1 (Marked in blue- 110V/220V) ((This product))
The first power adapter uses the 110V Service Outlet found in many North American pinball machines. The benefits of using the service outlet of your machine and Option 1 are:
-No power conflict with your game, or any other mod
-You don't have to hook up to your game's electronics
-Slightly brighter than using 12V option (~10%)
-Great for a novice!
If you have a service outlet in your machine, we strongly recommend selecting this adapter type, as it assures no voltage fluctuations from the pinball machine. This adapter comes with an included AC/DC 110/220 volt plug (US wall wart) that plugs into your pin's service outlet to provide power. However, since this outlet is always on, what makes this installation really easy and unique is that the Lighted Magnetic Hinge Covers are triggered by a light sensor! When your game is off and there are no lights on in your game, the mod is off. When your game is on, the mod senses the light and turns on. It’s that simple. Using this system pulls power before your pinball's circuits, and won't tax your pinball machine's power availability for additional modding.
Disadvantage: Must have a service outlet in your pinball machine, or be prepared to install one.
Option 2 (Marked in red- 12V) ((NOT This product))
The other power adapter option allows you to tap directly off of your game, using game-specific power adapters provided, and a voltage regulator.
-The benefit of this method is that it will allow you to hook up to any game.
-This method does not require the use of a photo-sensor, as it will automatically power your hinge covers when the game is powered on. It also does not include a US plug Wall Wart power adapter, since you will be tapping power directly from your game, so this is a great option for those without a service outlet who do not wish to opt for one.
-Our power tap has both male and female plugs so you don't lose existing connections. To see more power adapter details just browser search "Lightedpinballmods power adapters".
-We’ve made sure that you would have enough wire for complete flexibility. In most games, the wire from the Lighted Magnetic Hinge Covers can go between the back box and the main body of the game. On other games, the wire can be run through an air vent on the back box or on the bottom of the game.
To view how simple Lighted Magnetic Hinge Covers are to install, please view this video for installation from start to finish. It only takes 91 seconds:
22 second video of a row of games with Lighted Magnetic Hinge Covers installed. Stern Lighted Magnetic Hinge Covers are much bigger then Bally/Williams/WPC
**Picture with Star Wars and Iron Maiden Lighted Magnetic Hinge Covers is a picture of "included components". The title specific Lighted Magnetic Hinge Covers are not included, unless that is the title purchased. You will however, get your titled hinge, according to the title of your order placed. The Lighted Magnetic Hinge Covers are so easy to install, that even the guy that made that kind of sentence necessary can install them in under 15 minutes.
**Picture with The Twilight Zone Lighted Magnetic Hinge Covers is a picture of "installation demonstration". The Twilight Zone Lighted Magnetic Hinge Cover not included, unless that is the item purchased. You slap this on your pinball's hinge like a 'fridge magnet, plug it into your chosen power source, and let her bring fresh bright new life to your pin, that's what we're showing you here folks.
Looking for another color?
WE GOT COLORS!!
For an extra cost, we can custom design a variety of 7 DIFFERENT colors of this product. Just select a color under "variation" for the color you want, and we will custom make it for you. One of the photos on the product shows the colors, but trust us when we say that pictures just don't do it justice! Color options are Red, Orange, Yellow, Green, Dark Blue, Light Blue, Purple, and White.
From $ 99.99
Price depends on selected item variation.
Ships for $ 8.00 (International $ 30.00)
Contact Lighted Pinball Mods (via PinsideMail)
This ad is linked to 2 games: