“Colored DMDs, Display Replacement, Modding, VPin”
Enhance your Sega 192x64 experience!
This Display-Set replaces your original amber Plasma DMD with our all new RGB LED Display.
Even if you don't like colorful animations it's a perfect fit and replace for your defective DMD and can emulate amber and several other colors.
This is NO LCD, but a real DMD
Installation is simple, reversible and quick.
No need to cut, solder or agressively modify your machine.
Only 2 small wires have to be put to the main power by included clamps.
the Set contains everything you need to replace your old DMD:
-Frame including matching mounting holes. No modification to machine needed like TFT solution
-RGB Panels 192X64 original resolution with stunning contrast and high brightness (can be adjusted)
-Controller (bigger Chip then last version, USB, MicroSD)
-MicroSD - USB Adaptor
-MicroSD Card 8GB
-complete cabeling to connect to machine (prewired, connectors mounted)
I choose to stay on save secondary power supply because power supply for DMDs on these machines was a weak point, and caused a lot of DMDs to reboot or not even start.
Installation is really simple and convenient, takes around 10-15 minutes!
Please ignore tearing and flickering, this is caused by the camera, not the display itself!
Additional activation fee is 10,- Eur(more is ok, it's for charity!) and has to be donated through www.pin2dmd.com/installation No.3
Ships for € 40.00
Almost out of stock
Contact (via PinsideMail)
This ad is linked to 4 games: